DOI QR코드

DOI QR Code

음향공진법을 이용한 PVC/MBS의 탄성 및 감쇠 특성 평가

An Assessment of Elastic and Damping Material Properties of PVC/MBS by an Acoustic Resonance Method

  • 박명균 (명지대학교 기계공학과) ;
  • 박세만 (명지대학교 기계공학과) ;
  • 최영식 (명지대학교 기계공학과 대학원) ;
  • 박상규 (연세대학교 환경공학과 소음진동연구실)
  • 발행 : 2002.10.01

초록

In this investigation, experimental attempts were made to observe and determine the variations in elastic and damping properties of the PVC depending on the amounts of MBS added to the mixture, PVC/MBS, and also on the thicknesses of the specimens. An acoustic resonance technique was used for the tests In this investigation. It serves as a method to characterize properties of materials set in vibrational motions, which is initiated by low level stresses generated by externally supplied acoustic energy. Substantial variations were observed in the test results with the addition of the MBS to the PVC. It was found that the magnitudes of elastic constants decrease while the damping capacity improve when MBS rubber was added in the range up to 9 phr.

키워드

참고문헌

  1. Leo, L. B., and Eric, E. U., 1992, Noise and Vibration Control Engineering, John Wiley & Sons, Inc., New York.
  2. 박연수 등, 1998, “발파진동에 의한 가스관의 안전성 평가 연구보고서”, 한국가스공사 연구개발원, 5장.
  3. 박연수 등, 1999, “차량하중하에서 가스관의 진동측정 및 평가”, 한국소음진동공학회, 추계학술발표회 논문집, pp. 572-577.
  4. Kenneth, G. M., 1995, Vibration Testing, John Wiley & Sons, Inc., New York.
  5. Mary, J. S., and William, B. S., 1997, Impact echo:Nondestructive Evaluation of Concrete and Masonry, Bullbrier Press, Ithaca, New York.
  6. Lee, Won Jae, 1988, “Characterization of Composites by Internal Friction and Elastic Modulus Measurements”, M. S. Thesis, Michigan State University.
  7. Rao, 1995, Mechanical Vibrations, Addison-wesley, New York.
  8. 최영식 등, 2001, “샤피충격시험기를 이용한 고무보강 폴리머재료의 파괴인자 결정에 관한 연구”, 대한기계학회, 춘계학술발표회 논문집, pp. 389-394.