New Single Stage PFC Full Bridge AC/DC Converter

새로운 방식의 PFC Single Stage Full Bridge AC/DC Converter

  • Published : 2002.07.01

Abstract

This paper proposes new single stage power factor correction (PFC) full bridge converter. The proposed converter is combined previous ZVS full bridge DC/DC converter with two inductors, two diodes, two magnetic coupling transformer for PFC. This process of power is isolated from the source and also regulate stable DC output voltage in a category. In this topology, the voltage stress of main switches is reduced by zero voltage switching. Moreover, the proposed converter doesn't need active PFC switch and auxiliarly circuits, like control and gating board, so it could decrease the size and cost and increase the efficiency.

본 논문은 새로운 단일 전력단 역률보상 풀 브리지 컨버터를 제안하였다. 제안된 컨버터는 역률보상을 위하여 앞단에 2개의 인덕터, 2개의 다이오드, 2개의 자성결합 변압기를 가진 2VS 풀브리지 DC/DC 컨버터로 구성되어 있다. 이러한 구성방법에 의해 전력은 전원에서 분리되고, 안정된 직류출력전압을 얻을 수 있다. 이 토폴로지에서 주소자의 전압스트레스는 영전압스위칭에 의해서 감소되며, 또한 제안된 컨버터는 능동 역률보정 스위치와 제어 및 게이팅 보드와 같은 보조회로가 필요치 않게되어 규격과 단가를 낮출 수 있을 뿐 아니라 효율을 증가시킬 수 있다.

Keywords

References

  1. APEC A Topology Survey of Single-Stage Power Factor Corrector with a Boost Type Input-Current-Shaper Chongming Qiao and Keyue M. Smedley
  2. APEC Comparison Between CCM Single-Stage And Two-Stage Boost PFC Converters Jindong Zhang;Milan M. Jovanovi u;Fred C. Lee
  3. APEC Analysis and Design of a Single Stage Power Factor Corrected Full-Bridge Converter Mei Qiu;Gerry Moschopoulos;Humberto Pinheiro;Praveen Jain
  4. PESC A Novel Interleaved Discontinuous-Current-Mode Single-Stage Power-Factor-Correction Technique with Universal-Line Input Jindong Zhang;Fred C. Lee;Milan M. Jovanovic