References
- M. Kazutoyo, K. Tsukasa, I. Satoru, S. Katsumasa, and S. Tetuo, 'Study on Automatic Polishing of Injection Mold -Polishing with constant pressure under controlled tool staying time-,' Proc. of the ABTEC, pp. 431-434, 1995
- G. M. Park, J. H. Jang, and C. S. Han, 'A study on the Experimental Analysis of the Automatic Fine Polishing System,' J. of KSPE, Vol. 12, No. 9, pp. 30-39, 1995
- M. Suziki, S. lchiyasu, K. Kirii, S. Sunahara, T. Sakuta, and A. Asai, 'Development of Die-finishing Robotic System Controlled by CAD/CAM System,' JSPE-58-08, pp. 1309-1314, 1992
- S. C. Kang, M. S. Kim, and K. I. Lee, 'Development and Verification of a Robot Off-line Programming System for Die Polishing Process,' J. of KSPE, Vol. 14, No. 1, pp 69-77, 1997
- M. Kunieda, T. Nakagawa, and T. Higuchi, 'Robot Polishing of Curved Surface with Magnetically Pressed Polishing Tool,' JSPE, Vol. 54, No.1, pp. 121-125, 1988
- Y. S. Oh and B. S. Ryuh, 'The Development of Grinding Robot System Using NC Data and Off-Line Programming,' J. of KSPE, Vol. 16, No. 3, pp. 9-17, 1999
- S. J. Park, S. H. Lee, K. S. Ryu, B. S. Sin, D. S. Choi, and D. H. Kim, Development of an Integrated Design and Machining System for 3-D Surface, Final Report, KIMM, 1993
- K. Shunichi, A. Tojiro, and L. Ichiro, 'Development of a Robot-Polishing System (Polishing Force Control by Means of fuzzy Set Theory),' JSME J. Series C, Vol. 57, No 543, pp. 3714-3719, 1991
- M. C. Lee, Y. G. Cho, and M. H. Lee, 'Evaluation of Polishing Performance Using the Improved Polishing Robot System Attached to Machining Center,' J. of KSPE, Vol. 16, No. 9, pp. 179-190, 1999
- M. C. Lee, S. J. Go, M. H. Lee, C. S. Jun, D. S. Kim, K. D. Cha, and J. H. Ahn, 'A Robust Trajectory Tracking Control of a Polishing Robot System Based on CAM Data,' Int. J. of RCIM, Vol. 17:1-2, pp. 177-183, 2001 https://doi.org/10.1016/S0736-5845(00)00052-1
- K. S. Fu, R. C. Gonzalez, and C. S. G. Lee, Robotics, McGraw-Hill, 1987
- K. Nishimoto, 'DSP and Its Application to Robot Control,' J. of the Robotics Society of Japan, Vol. 7, No. 3, pp. 339-345, 1985
- M. C. Lee, and D. J. Ha, 'A Study on the Development of Polishing Robot System Attached to Machining Center for Curved Surface Die,' J. of KSPE, Vol. 16, No. 4, 1999
- M. C. Lee, and N. Aoshima, 'Identification and Its Evaluation of the System with a Nonlinear Element by Signal Compression Method,' Trans. of SICE, pp. 729-736, 1989
- M. C. Lge and N. Aoshima, 'Real Time Multi-Input Sliding Mode Control of a Robot Manipulator Based on DSP,' Proc. of SICE, pp. 1223-1228, 1993
- M. C. Lee, and S. J. Go, ' Real Time Fuzzy-Sliding Mode Control for SCARA Robot Based on DSP,' Proc. of 2nd Asian Control Conference, pp. 599-602, 1997
- M. C. Lee, K. Son, J. M. Lee, 'Improving Tracking Performance of Industrial SCARA Robots Using a New Sliding Mode Control Algorithm,' KSME I. J., Vol. 12, No. 5, pp. 761-772, 1998 https://doi.org/10.1007/BF02945543