References
- Chang, M. J., Shyu, R. J. and Fang, L.J., 1987, 'An Experimental Study of Heat Transfer from Surface Mounted Components to a Channel Airflow,' ASME Paper No. 97-HT-75
- Roeller, P. T., Stevens, J. and Webb, B. W., 1991, 'Heat Transfer and Turbulent Flow Characteristics of Isolated Three-Dimensional Protrusions in Channels,' ASME J. of Heat Transfer, Vol. 113, pp. 597-603 https://doi.org/10.1115/1.2910607
- Rosten, H. I. and Viswanath, R., 1994, 'Thermal Modeling of the Pentium TM Processor Package,' IEEE Electronic Component Technology Conf., Washington, D.C., pp. 421-428
- Behnia, M., Nakayama, W. and Wang, J., 1998, 'CFD Simuation of Heat Transfer from a Heated Module in an Air Stream: Comparison with Experiments and a Parametric Study,' InterSociety Conf. on Thermal Phenomena, pp. 143-151
- Chyu, M. K. and Natrajan, V., 1991, 'Local Heat/Mass Transfer Distributions on the Surface of a Wall-Mounted Cube,' ASME Journal of Heat Transfer, Vol. 113, pp. 851-857 https://doi.org/10.1115/1.2911213
- Nakamura, H., Igarashi, T. and Tsutsui, T., 2001, 'Local Heat Transfer Around a Wall-Mounted Cube in the Turbulent Boundary Layer,' Int. J. of Heat Mass Transfer, Vol. 44, pp. 3385-3395 https://doi.org/10.1016/S0017-9310(01)00009-6
- Natarajan, V. and Chyu, M. K., 1994, 'Effect of Flow Angle-of-Attack on the Local Heat/Mass Transfer from a Wall-Mounted Cube,' Trans. ASME, J. Heat Transf., Vol. 116, pp. 552-560 https://doi.org/10.1115/1.2910906
-
Nakamura, H. and Igarashi, T. and Tsutsui, T., 1999, 'Local Heat Transfer Around a Wall-Mounted Cube(The Case of the Attack Angle of
$45^{circ}$ ),' JSME B, Vol. 65-639, pp. 3771-3776 - Ramadhyani, S., Moffat, D. F. and Incropera, F. P., 1985, 'Conjugate Heat Transfer from Small Isothermal Heat Sources Embedded in a Large Substrate,' Int. J. of Heat Mass Transfer, Vol. 28, No. 10, pp. 1945-1952 https://doi.org/10.1016/0017-9310(85)90216-9
- Moffat, D. F., Ramadhyani, S. and Incropera, F.P., 1986, 'Conjugate Heat Transfer from Wall Embedded Sources in a Rectangular Channel,' ASME HTD-57, pp. 177-182
- Ortega, A., Ramanathan, S., Chicci, J. D. and Prince, J. L., 1993, 'Thermal Wake Models for Forced Air Cooling of Electronic Components,' Proc. 9th IEEE SEMI-THERM Symposium, pp. 63-74 https://doi.org/10.1109/STHERM.1993.225330
- Davalath, J. and Bayazitoglu, T., 1987, 'Forced Convection Cooling Across Rectangular Blocks,' ASME J. of Heat Transfer, Vol. 109, pp. 321-328 https://doi.org/10.1115/1.3248083
- Zebib, A. and Wo, Y. K., 1989, 'A Two-Dimensional Conjugate Heat Transfer Model for Forced Air Cooling of an Electronic Device,' ASME J. of Electronic Packaging, pp. 171-178
- Nakayama, W. and Park, S. H., 1996, 'Conjugate Heat Transfer from a Single Surface-Mounted Block to Forced Convective Air Flow in a Channel' ASME J. of Heat Transfer, Vol. 118, pp. 301-309 https://doi.org/10.1115/1.2825845
- Lee, J. H., Park, S. H. Riu, K. J. and Bang, C. H., 2000, 'Mixed Convection Transport from a Module on the Bottom Surface of Three Dimensional Channel,' Trans. of the KSME, Vol. 24, No. 5, Part B, pp. 632-639
- Yun, B. T. and CHoi, D. H., 1999, 'Analysis of Three-Dimensional Mixed Convection Flow About Uniformly Distributed Heat-Generating Blocks on a Conductive Wall,' Trans. of the KSME, Vol. 23, No. 1, Part B, pp. 1-11
- Hunt, J. C. R., Aell, C. J., Peterka, J. A. and Woo, H., 1978, 'Kinematical Studies of the Flows Around Free or Surface-Mounted Obsta-Applyng Topology to flow Visualization,' J. of Fluid Mechanics, Vol. 86, Part 1, pp. 179-200 https://doi.org/10.1017/S0022112078001068
- Baker, J. C., 1979, 'The Laminar Horseshoe Vortex,' J. of Fluid Mechanics, Vol. 95, Part.2, pp. 347-367 https://doi.org/10.1017/S0022112079001506
- Hunt, J. C. R., Lalas, D. P. and Asimakopoulos, D. N., 1984, 'Air Flow and Disperison in Rough Terrain : A Report on Euromech 173,' J. of Fluid Mechanics, Vol. 142, pp. 202-216 https://doi.org/10.1017/S0022112084001063
- Hasan, M. A. Z., 1989, 'The Near Wake Structure of a Square Cylinder,' Int. J. Heat and Fluid Flow, Vol. 10, No. 4, pp. 339-348 https://doi.org/10.1016/0142-727X(89)90024-6
- Kline, S. J., 1985, 'The Purposes of Uncertainty Analysis,' ASME J. of Fluid Engineering, Vol. 107, pp. 153-160 https://doi.org/10.1115/1.3242449