The Design of the Linear Power Amplifier using Analog Feedforward Linearizer for IMT-2000 Band

아날로그 Feedforward 선형화기를 이용한 IMT-2000대역 선형증폭기 설계

  • 박웅희 (한국전자통신연구원 무선방송연구소 전파기반부) ;
  • 이경희 (한국전자통신연구원 무선방송연구소 전파기반부) ;
  • 강상기 (한국전자통신연구원 무선방송연구소 전파기반부)
  • Published : 2002.06.01

Abstract

In this paper, the LPA(Linear Power Amplifier) using new analog feedforward linearizer for IMT-2000 frequency band(2110MHz∼2170MHz) is proposed and fabricated. The designed analog feedforward linearizer system possessing the characteristics of stable operation for input power variation is simple structure and small size. When two-tones in IMT-2000 frequency band are applied to an amplifier, this LPA have the average output power is about 30W and the IMD value is below about 60dBc without correcting the circuit. In camparision with an amplifier without feedforward system at the same output power, the supposed analog feedforward linear amplifier posseses improved the IMD characteristics of over 23dB.

본 논문에서는 새로운 방식의 아날로그Feedforward 선형화기 시스템을 이용하여 IMT-2000주파수 대역(2110∼2170 MHz)에서 동작하는 평균 출력전력 30W급의 선형증폭기를 설계 및 제작하였다. 새로운 방식의 아날로그 Feedforward 방식의 회로는 크기가 작고, 회로 동작이 단순하여 안정된 동작을 수행하였다. 제작된 선형증폭기는 2110∼2170MHz 대역 중에서 2-tone 신호를 입력할 경우에 주파수 대역에 따른 별도의 회로 수정없이 60dBc 이상의 혼변조 신호 감쇄를 가졌다. 이는 주전력증폭기의 동일한 출력대비 23dB 이상의 혼변조 신호 감쇠 효과를 갖는 것이다.

Keywords

References

  1. Hsieh C, Chan S., 'A S-band high power feedback amplifier', Proceeding of IEEE MTTS, pp.182-184, 1997
  2. 정요채, 혼변조 신호의 개별 차수 조정 Predistortion 선형화기 설계, 박사학위 논문, 서강대학교, 1995
  3. K. yamauchi, K. Morl, M. Nakayama, Y. Mitsui, T. Takagi, 'A Microwave Miniaurized Linearizer Using a Parallel Diode', IEEE MIT-S Digest, pp. 1199-1202, 1997 https://doi.org/10.1109/MWSYM.1997.596542
  4. Nick Pothecary, Feedforward Linear Power Amplifier, Artech House, 1999
  5. P. B. Kenington, High-Linearity RF Ampli-fier Design, Artech House, 2000
  6. 남상대, 박응희, 장익수, 윤상원,'Feed-forward 선형화기 시스템의 오차 추출 루프를 위한 크기와 위상 제어 회로의 설계', 대한 전자공학회지, 제 37권 TC편, 제2호, pp. 91-97, 2. 2000