초록
본 논문은 프로브 피드와 이중 패치 구조를 이용한 마이크로스트립 안테나 대역폭 개선에 관한 것이다. PCS와 IMT-2000 서비스를 동시에 제공하기 위한 안테나는 임피던스 대역폭이 22%가 되어야 한다. 본 논문에서는 구조가 복잡하지 않는 광대역 마이크로스트립 패치 안테나에 대해 제안한다. 마이크로스트립 패치 안테나의 특성 해석은 상업용 소프트웨어인 앙상블을 이용하였다. 마이크로스트립 패치 안테나의 설계, 제작 및 보정한 결과 값은 VSWR 2에서 임피던스 대역폭이 500 ㎒(25.5%), VSWR 1.5에서 임피던스 대역폭이 430 ㎒(21.9%)의 결과를 얻었다. 안테나의 복사패턴에서 부엽(side lobe)은 -14 dB를 가졌고, 전후방비(front to back ratio)는 전체적으로 20 dB를 얻었다. 안테나의 측정 이득은 5.2 dBi이다.
In this paper, to improve bandwidth of microstrip antenna, we discussed the patch structure using dual patch and probe feed. To provide PCS service and IMT-2000 service simultaneous, a microstrip patch antenna needs impedance bandwidth of 22%. We propose wide-band microstrip path antenna without complexity. To analyze characteristics of microstrip patch antenna, we used Ensemble of commercial software. The microstrip patch antenna was designed, fabricated, and tuned. The result was that 500 ㎒(25.5%) of impedance bandwidth for VSWR 2,430 ㎒(21.9%) of impedance bandwidth for VSWR 1.5. The microstrip patch antenna has side lobe of -14 dB. The front to back ratio is 20 dB overall. The measured gain of the microstrip patch antenna is 5.2 dBi.