Constitutive Equation for Woven Fabric Reinforced Thermoplastic Composites Considering Shear Stiffness

전단강성이 고려된 직물강화 열가소성 복합재료 조성방정식

  • 유웅렬 (미시간주립대학교 기계공학과)
  • Published : 2002.08.01

Abstract

A new constitutive model has been developed based on the homogenization method by considering the micrcostructure of composites including both the mechanical and structural properties of woven fabric reinforcements. The constitutive equation enables to simulate the deformation behavior of thermoplastic composites in forming processes as reported in the previous paper. In the previous formulation for the constitutive equation, the warp and weft yams over crossover were assumed to freely rotate without considering frictional behaviors. This assumption is released in this study to simulate the shear behavior of fabric reinforcements due to the frictional behavior of crossing points between the warp and the weft. A simple but effective way to add the shear resistance of woven fabrics into the constitutive model is discussed. Based on literatures, several examples were simulated for validation purposes in this study.

Keywords

References

  1. Sheet Forming of Composite Materials C.M.O'Bradaigh;S.G.Advani(ed.)
  2. Composites Part A v.29 A Direct Comparison of Matched-die Versus Diaphragm Forming J.Krebs;K.Friedrich;D.Bhattacharyya https://doi.org/10.1016/S1359-835X(97)82706-6
  3. Composites Part A.32 Analyses of Fabric Tensile Behavior:Determination of the Biaxial Tension-Strain Surfaces and Their Use in Forming Simulation P.Boisse;A.Gasser;G.Hivet
  4. J.Compos Mater v.35 Processing of Composites:Simulations of the Draping of Fabrics with Updated Material Behavior Law L.Dong;C.Lekkou;M.G.Bader https://doi.org/10.1177/002199801772661975
  5. Composites Part A v.29 Numerical and Experimental Investigation of Some Press Forming Parameters of Two Fiber Reinforced Thermoplastics: APC2-AS4 and PEI-CETEX P.Luca;P.Lefebure;A.K.Pickett https://doi.org/10.1016/S1359-835X(97)00060-2
  6. Compos.Struct v.52 Finite Element Analysis of Textile Composite Preform Stamping R.M.J.S.Sidhu;R.C.Averill;M.Riaz;F.Pourboghrat https://doi.org/10.1016/S0263-8223(01)00038-1
  7. J.Mater Proc.Tech v.118 Mechanical and Numerical Modeling of Composite Manufacturing Process Deep-Drawing and Laying-up of Thin Preimpregnated woven Fabrics A.Cherouat;J.L. Billoet https://doi.org/10.1016/S0924-0136(01)00987-6
  8. J.Korean Fiber Soc v.38 Hydroforming Process Analysis of Woven Fabric Reinforced Thermoplastics Composites Using Non-orthogonal Constitutive Equation W.R.Yu;K.Chung;F.Pourboghrat;T.J.Kang
  9. Composites Part A. Non-orthogonal Constitutive Equation for Woven Fabric Reinforced Thermoplastic Composites W.R.YU;F.Pourboghrat;K.Chung;M.Zampaloni;T.J.Kang
  10. Composites Part A v.31 Experimental Studies and Analysis of the Draping of Woven Fabrics U.Mohammed;C.Lekakou;M.G.Bader https://doi.org/10.1016/S1359-835X(00)00080-4
  11. Composites Part A v.31 Solid-Mechanics Finite Element Simulations of the Draping of Fabrics a Sensitivity and Analysis L.Dong;C.Lekakou;M.G.Bader https://doi.org/10.1016/S1359-835X(00)00046-4