한국CDE학회논문집 (Korean Journal of Computational Design and Engineering)

  • 제7권3호
  • /
  • Pages.184-188
  • /
  • 2002
  • /
  • 2508-4003(pISSN)
  • /
  • 2508-402X(eISSN)
한국CDE학회 (Society for Computational Design and Engineering)
권호 표지

공구간섭으로 인한 미절삭 윤곽의 잔삭가공을 위한 효율적인 공구경로

An Efficient CleanUp Tool Path for Undercuts Come from Cutter Interferences in Profile Machining

  • 주상윤 (울산대학교 공과대학 산업정보경영학부) ;
  • 이상헌 ((주)큐빅테크 DDM 센터)
  • 발행 : 2002.09.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In 2D-Profile machining using cutter radius compensation cutter interferences are very common. To prevent the cutter interferences undercuts are inevitable in some regions of the profile. The undercut regions require cleanup machining using smaller radius tools. This paper considers a procedure of the tool path generation for the cleanup profile machining. And two methods are introduced for an efficient tool path generation. One is how to reduce the machining time by uniting adjacent tool paths of undercut regions, and the other is how to find the tool path with the minimal distance by applying TSP algorithm.

키워드

참고문헌

  1. CAD/CAM시스템과 CNC절삭가공 최병규 (외)
  2. IE Interfaces v.9 no.2 자동차 산업의 금형제작을 위한 3차원 윤곽가공 주상윤;남장현
  3. Computer-Aided Design v.25 no.6 Smooth biarc curves Schoherr, J. https://doi.org/10.1016/0010-4485(93)90031-I
  4. Computer-Aided Design v.24 no.6 Approximation of discrete data by G1 arc spline Meek, D. S.;Walton, D. J. https://doi.org/10.1016/0010-4485(92)90047-E
  5. Computer-Aided Design v.26 no.11 Curve fitting with arc spline for NC tool path generation Yeung, M. K.;Walton, D. J. https://doi.org/10.1016/0010-4485(94)90099-X
  6. IE Interfeces v.8 no.3 공구경보정을 이용한 2차원 자유곡선의 가공 신하용;정희민;곽영수
  7. Science v.220 Optimization by Simulated Annealing Kirkpatrick, S.;Gelatti, C. D.;Vecchi, M. P. https://doi.org/10.1126/science.220.4598.671