Reverse Engineering of Unknown Free-formed Surface using Multi-sensor

다중센서를 이용한 자유곡면의 역공학

  • 윤길상 (인하대학교 기계공학부 대학원) ;
  • 조명우 (인하대학교 기계공학부)
  • Published : 2002.08.01

Abstract

In this paper, an efficient reverse engineering method for free-formed surfaces is proposed based on the integration of a repetitive digitizing method and vision system. In recent reverse engineering process, the equi-interval digitization method is being used since the surface information is not known. If more accurate results are required, the number of measuring point should be increased appropriately. Thus, such measuring process tends to result in too dense data including useless information, and cause excessive measuring time. This problem can be improved by applying repetitive digitizing method and image process technique, which is proposed in this paper. The proposed methods are validated through appropriate simulation and experiments.

Keywords

References

  1. C. K. Song, S. W. Kim, 'Autonomous digitization of Free-form surface on a CNC coordinate measuring machine,' Int. J. Machine Tools Manufacture, Vol. 37, No. 7, pp. 1041-1051. 1997 https://doi.org/10.1016/S0890-6955(96)00059-4
  2. J. H. Cho, 'Integrated computer-aided manufacturing system for Multi-patch sculptured surfaces,' Ph.D. Thesis, University of Illinois at Chicago, 1995
  3. Les Piegl, Wayne Tiller, 'The NURBS book,' Springer, 1995
  4. M. W. Cho, 'Flexible Inspection System Using CAD Database and Vision Guided Coordinate Measuring Machine,'Ph.D. Thesis, University of Illinois at Chicago, 1993
  5. M. W. Cho, K. Kim, 'New inspection planning strategy for sculptured surfaces using coordinate measuring machine,' International Journal of production research, Vol. 33, No. 2, pp. 427-444, 1995 https://doi.org/10.1080/00207549508930158
  6. Rida T. Farouk, 'On integrating lines of curvature,' Computer aided geometric design, Vol. 15, pp. 187-192, 1998 https://doi.org/10.1016/S0167-8396(97)00022-8
  7. Y. D. Chen, X. J. Tang, J. Ni and S. M. Wu, 'Automatic Digitization of Free-form Curve by Coordinate Measuring Machines,' International Journal of Production Research, Vol. 32, No. 11, pp. 2603-2612, 1994 https://doi.org/10.1080/00207549408957086
  8. 남우선, 정성종, '3 차원 자유곡면 온더머신 측정 및 검사 시스템 개발,' 97 년 추계학술대회논문집, pp. 911-914, 1997
  9. 장동고, 김광수, '3 차원 측정 데이터의 그레고리 곡면으로의 근사,' 98 년 CAD/CAM 학술발표 논문집, pp. 368-374, 1998