DOI QR코드

DOI QR Code

마이크로파 가열을 이용한 Ni-Zn 페라이트의 소결

Sintering of Ni-Zn Ferrites by Microwave Hybrid Heating

  • 김진웅 (아주대학교 재료공학과) ;
  • 최승철 (아주대학교 재료공학과) ;
  • 이재춘 (명지대학교 무기재료공학과) ;
  • 오재희 (인하대학교 재료공학부)
  • 발행 : 2002.07.01

초록

마이크로파(2.45GHz, 700w) 에너지를 이용한 마이크로웨이브 하이브리드 소결법으로 90$0^{\circ}C$~107$0^{\circ}C$의 온도 범위에서 Bi$_2$O$_3$와 CuO가 함유된 Ni-Zn 페라이트를 소결하고 이 결과를 일반 소결법으로 소결된 시편과 비교하였다. 각 소결체의 공정 시간은 20~$25^{\circ}C$/min의 승온속도에서 60분 이내에 마칠 수 있었다. XRD분석결과 Ni-Zn페라이트의 단일상만이 관찰되었으며 일반 소결보다 빠른 시간에 소결이 진행되었다. 97$0^{\circ}C$에서 15분 소결 했을 때 소결밀도는 98%로 최대값을 나타내었으며, 모든 소결체의 소결밀도는 90% 이상의 소결 밀도를 나타내었다. 마이크로 하이브리드 소결법으로 소결된 시편과 일반 소결법으로 소결된 시편을 비교하면 소결 특성은 비슷한 결과를 얻을 수 있었다. 마이크로파 에너지를 이용한 소결법은 일반 소결법에 비하여 짧은 시간 안에 공정을 완료할 수 있으므로 공정 시간과 에너지 절약 측면에서 유효한 공정으로 판단된다.

Ni-Zn ferrite was sintered by microwave hybrid sintering method using microwave energy of 2.45 GHz, 700 W in the temperature range of 900$^{\circ}C$ ∼ 1070$^{\circ}C$. A high density (98%TD) Ni-Zn ferrite, added Bi$_2$O$_3$ and CuO, with a single phase was obtained by microwave sintering at 970$^{\circ}C$ for 15 min. All the sintered samples showed sintered density over 90% of TD. These results indicate that the processing time and energy consumption can be reduced significantly by microwave hybrid sintering method.

키워드

참고문헌

  1. J. Am. Ceram. Soc. v.71 no.1 Hydrothermal Preparation of Ultrafine Ferrites and their Sintering S. Komarneni;E. Fregeau;E. Breval;R. Roy
  2. J. Kor. Ceram. Soc. v.35 no.11 Microwave Sintering Behavior and Electrical Properties of BaTiO₃ Ceramics K. Bai;H. G. Kim
  3. J. Kor. Assoc. Cryst. Growth v.5 Rapid Sintering of PZT Piezoelectric Ceramic by Using Microwave Hybrid Energy S. W. Hong;B. J. Chae;J. S. Hong;Z. S. Ahn;S. C. Choi
  4. J. Kor. Assoc. Cryst. Growth v.8 Microwave Hybrid Sintering of NTC Themistor Y. L. Choi;J. Y. Ahn;Z. S. Ahn;D. K. Paik;S. C. Choi
  5. J. Am. Ceram. Soc. v.68 no.2 Microwave Processing of Ceramic Materials W. H. Sutton https://doi.org/10.1111/j.1151-2916.1985.tb10146.x
  6. J. Kor. Ceram. Soc. v.29 no.4 Densification and Grain Growth of Alumina Heated by Microwave D. H. Kim;S. R. Oh;C. H. Kim
  7. J. Am. Ceram. Soc. Bull. v.66 no.7 Microwave Sintering of Ceramics: Can we Save Energy? S. Das;T. R. Curlee
  8. Electronic Matrial-Ferrite T. Hiraka;K. Okutani;T. Oshima
  9. J. Magnetism and Magnetic Mater. v.209 Microwave Sintering of NiCuZn Ferrires and Multilayer Chip Inductors C. Y. Tsay;K. S. Liu;T. F. Lin;I. N. Lin https://doi.org/10.1016/S0304-8853(99)00684-8
  10. Metal Prog. v.134 no.3 Microwave Sintering of Ceramics B. Swain
  11. Materials in Processing Report v.3 no.4 Microwave Processing Symposium Report R. G. Ford
  12. Am. Ceram. Soc. Bull. v.52 no.3 Microwaves for Ceramic Process Control W. B. Campbell;J. V. Shivers
  13. U.S. Pat. No. 4140887 Method for Microwave Heating W. H. Sutton;W. E. Johnson
  14. Advances in Ceramics v.15 International conference on ferrites;Microwave Sintering of Ferrites F. Okada;S. Tashiro;M. Suzuka;F. Y. Wang(ed.)
  15. Microwave Processing of Materials v.124 Microwave Sintering of Ceramics V. K. Varadan;Y. Ma;A. Lakhtakia;V. V. Varadan;W. H. Sutton(ed.);M. H. Brooks(ed.);I. J. Chabinsky(ed.)
  16. Microwave Processing of Materials v.124 Microwave Heating of Ceramics and its Application to Joining H. Fukushima;T. Yamanka;M. Matsui;W. H. Sutton(ed.);M. H. Brooks(ed.);I. J. Chabinsky(ed.)
  17. J. Am. Ceram. Bull. v.67 no.1 Manufacturing Ceramics with Microwaves: The Potential for Economical Production L. M. Sheppard