Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

A Study on the Ultrasonic Micro-machining and Measurement System

초음파 초정밀 가공 및 측정시스템에 대한 연구

  • Ju, Jong-Nam (Dept.of Mechanical Aerospace Engineering, Seoul National University) ;
  • Han, Dong-Cheol (Dept.of Mechanical Aerospace Engineering, Seoul National University) ;
  • Park, Hui-Jae (Dept.of Mechanical Aerospace Engineering, Seoul National University) ;
  • Park, Sang-Sin (Dept.of Mechanical Engineering, Yeungnam University) ;
  • Je, Seong-Uk (Dept.of Mechanical Aerospace Engineering, Seoul National University)
  • 주종남 (서울대학교 기계항공공학부) ;
  • 한동철 (서울대학교 기계항공공학부) ;
  • 박희재 (서울대학교 기계항공공학부) ;
  • 박상신 (영남대학교 기계공학부) ;
  • 제성욱 (서울대학교 기계항공공학부)
  • Published : 2002.07.01
Download PDF
⟨ Previous Next ⟩

Abstract

Ultrasonic Machining (USM) is widely used in cutting of non-conductive, brittle workpiece materials such as engineering ceramics. However, USM has a limitation in its application to micro machining because problems are occurred in attaching micro tools to the machine and maintaining high precision. Therefore Micro Ultrasonic Machining (MUSM) with WEDM is proposed in this research. The experiments are produced as the change of shaft diameter and abrasive size.

Keywords

References

  1. V.Soundrarajan, V.Radhakrishnan, 'An Experimental Investigation on The Basic Mechanisms Involved in USM,' Int. J. Mach. Tool Des. Res., Vol. 26, No. 3, pp. 307-321, 1986 https://doi.org/10.1016/0020-7357(86)90008-9
  2. M.Komarariah, P. Narasimha Reddy, 'Relative Performance of Tool Material in Ultrasonic Machining,' Wear, pp. 1-10, 1993 https://doi.org/10.1016/0043-1648(93)90446-S
  3. M.Komaraiah, 'A Study on The Influence of Workpiece Properties in Ultrasonic Machining,' Int. J. Mach. Tools Manufact., Vol. 33, No. 3, pp. 495-505, 1993 https://doi.org/10.1016/0890-6955(93)90055-Y
  4. G..S.Kainth, Amitav Nandy, Kuldeep Singh, 'On The Mechanics of Material Removal in USM,' Int. J. Mach. Tools Des. Res. Vol. 19, pp. 33-41, 1979 https://doi.org/10.1016/0020-7357(79)90019-2
  5. Xi-Qing Sun, T. Masuzawa, 'Micro Ultrasonic machining and Self-Aligned Multilayer Machining/Assembly Technologies for 3D Micromachines,' University of Tokyo, 7-22-1 Roppongi, Minato-ku, Tokyo 106, Japan
  6. Kai Egashira, T.Masuzawa, 'Application of Ultrasonic machining to Micromachining,' Seisan-Kenkyu, Vol. 49, No. 9
  7. M.Komaraia, M.A.Manan, 'Investigation of surface roughness and accuracy in Ultrasonic Machining,' Precision Engineering, Vol. 10, No. 2, pp. 59-65, 1988 https://doi.org/10.1016/0141-6359(88)90001-3
  8. 주종남, 김규만, 박상신, 김성윤, '미세방전가공 기술개발에 관한 연구,' 산업기술 기반과제 최종보고서, 1998