Journal of Mechanical Science and Technology

  • 제16권4호
  • /
  • Pages.476-484
  • /
  • 2002
  • /
  • 1738-494X(pISSN)
  • /
  • 1976-3824(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지

Ductile Fracture Behavior of AS4P Under Mixed Mode (I/II) Loading

  • 발행 : 2002.04.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The aim of this study is to investigate the ductile fracture behavior under mixed mode (I/II) loading using SA533B pressure vessel steel. Anti-symmetric 4-point (AS4P) bending tests were performed to obtain the J-R curves under two different mixed mode (I/II) loadings. In addition, finite element analysis using Rousselier Ductile Damage Theory was carried out to predict the J-R curves under mixed mode (I/II) loadings. In conclusions, the J-R curves under. Mixed Mode (I/II) loading were located between those of Mode I and Mode II loading. When the mixity of mixed mode (I/II) loading was high, the J-R curve of mixed mode (I/II) loading approached that of pure mode I loading after some amount of crack propagation. In contrast with the above fact, if the mixity was low, the J-R curve took after that of pure mode II loading. Finally, it was found that the predicted J-R curves made a good agreement with the test data through the tuning procedures of $\beta$ values at the different mixed mode (I/II) loading.

키워드

참고문헌

  1. Banks-Sills, L. and Bortman, Y., 1986, 'A Mixed-mode Fracture Specimen: Analysis and Testing,' International Journal of Fracture, 30, pp. 181-201 https://doi.org/10.1007/BF00019776
  2. Bilby, B. A., Howard, I. C. and Li, Z. H., 1993, 'Prediction of the First Spinning Cylinder Test Using Ductile Damage Theory,' Fatigue and Fracture of Engineering Materials and Structures, 16, pp. 1-20 https://doi.org/10.1111/j.1460-2695.1993.tb00067.x
  3. Brown, W. F. and Srawley, 1996, 'Plane Strain Crack Toughness Testing of High Strength Metallic Materials,' ASTM STP 410 pp. 1-129
  4. Davenport, J. C. W., 1993, 'Mixed Mode Elastic-Plastic Fracture,' Ph. D. Thesis, University of Bristol
  5. Howard, I. C., Li, Z. H. and Bilby, B. A., 1994a, 'Ductile Crack Growth Predictions for Large Centre Cracked Panels by Damage Modeling Using 3-D Finite Element Analysis,' Fatigue and Fracture of Engineering Materials and Structures, 17, pp. 959-969 https://doi.org/10.1111/j.1460-2695.1994.tb00825.x
  6. Howard, I. C., Li, Z. H. and Bilby, B. A., 1994b, 'Ductile Fracture Prediction of Large Centre-Cracked Panels by damage Theory Using 3-d Finite Element Calculations,' Fatigue and Fracture of Engineering Materials and Structures, 17, pp. 1075-1087 https://doi.org/10.1111/j.1460-2695.1994.tb00836.x
  7. Li, Z. H., Bilby, B. A. and Howard, I. C., 1994, 'A Study of the Internal Parameters of Ductile Damage Theory,' Fatigue and Fracture of Engineering Materials and Structures, 17, pp. 1075-1087 https://doi.org/10.1111/j.1460-2695.1994.tb00836.x
  8. Oh, D. J., 1999, 'Ductile Fracture Behaviour under Mixed Mode (I/II) Loading,' Ph. D. Thesis, University of Sheffield
  9. Oh, D. J. et al., 2000, 'Ductile Fracture Behaviour under Mode I Loading Using Rousselier Ductile damage Theory,' KSME Int. Journal, Vol. 14, No. 9, pp. 978-984 https://doi.org/10.1007/BF03185800
  10. Oh, D. J., 2001, 'Ductile Fracture Behavior of SPS Specimen under Pure Mode Ⅱ Loading,' Journal of KSME(A), Vol. 25, No. 2, pp. 289-295
  11. Rousselier, G., 1987, 'Ductile Fracture Models and Their Potential in Local Approach of Fracture,' Nuclear Engineering and Design 105, pp. 97-111 https://doi.org/10.1016/0029-5493(87)90234-2
  12. Rice, J. R. and Tracey, D. M., 1969, 'On the Ductile Enlargement of Voids in Triaxial Sstress Fields,' Journal of Mechanics, Physics and Solids, 17, pp. 201-217 https://doi.org/10.1016/0022-5096(69)90033-7
  13. Singh, D. and Shetty, D. K., 1989, 'Fracture Toughness of Polycrystalline Ceramics in Combined ModeⅠand ModeⅡ Loading,' Journal of American Ceramic Society, 72, pp. 78-84 https://doi.org/10.1111/j.1151-2916.1989.tb05957.x
  14. Suresh, S. and Tschegg, E. K., 1987, 'Combine Mode Ⅰ-Mode Ⅲ Fracture of Fatigue-Precracked Alumina,' Journal of American Ceramic Society, 70, pp. 726-733 https://doi.org/10.1111/j.1151-2916.1987.tb04871.x
  15. Wang, K. J., Hsu, C. L. and Kao, H., 1977, 'Calculation of Stress Intensity Factors For Combined Mode Bend Specimens,' Fracture 1977, Vol. 4, ICF4, Waterloo, Canada
  16. Wilson, W. K., 1969, 'On Combined Mode Fracture Mechanics,' Westinghouse Research Labs Report 69-1E7-FMECH-R1 1