참고문헌
- Amsden, A. A., O'Rourke, P. T., and Butler, T. D., 1989, 'KIVA-II : A Computer Program for Chemically Reactive Flows with Spray,' Technical Report LA-11560-MS., 1989, Los Alamos National Laboratory Report
- Bae, C. and Kang, J., 2000, 'Diesel Spray Development of VCO Nozzles for High Pressure Direct-Injection,' SAE Paper No. 2000-01-1254
- Bai, C. and Gosman, A. D., 1995, 'Development of Methodology for Spray Impingement Simulation,' SAE paper No 950283
- Darrozes, J. S. and Fransois, C., 1982, 'Mecanique des Fluides Incompressibles,' Lecture Notes in Physics, Springer-Verlag
- Furuya, M., Kinoshita, I., and Nishi, Y., 1998, 'Vapor Explosion in the Droplet Impingement System,' Proceedings of 11th IHTC, Vol. 5, pp. 471-476
- Ghadiri, H., 1978, 'Raindrop Impact, Soil Splash and Cratering,' Ph. D Thesis, University of Reading
- Katsura, N. Saito, M., Senda, J., and Fujimoto, H., 1989, 'Characteristics of a Diesel Spray Impinging on a Flat wall,' SAE Paper No 890264
- Matsui, Y. and Sugihara, K., 1986, 'Sources of Hydrocarbon Emissions from a Small Direct Injection Diesel Engines,' JSAE Review, 1986, Vol. 7, pp. 4-11
- Mundo, C., Sommerfeld, M. and Tropea, C., 1995, 'Droplet-Wall Collisions: Experimental Studies of the Deformation and Breakup Process,' Int. J. Multiphase Flow, Vol. 21, No. 2, pp. 151-173 https://doi.org/10.1016/0301-9322(94)00069-V
- Mundo, C., Sommerfeld, M. and Tropea, C., 1994, 'Experimental Studies of the Deposition and Splashing of Small Liquid Droplets Impinging on a Flat Surface,' ICLASS-94, pp. 134-141
- Naber, J. D. and Farrell, F. V., 1993, 'Hydrodynamics of Droplet Impingement on a Heated Surfaces,' SAE Paper No 930919
- Nurick, W. H., 1976, 'Orifice Cavitation and its Effect on Spray Mixing,' J. of Fluid Engineering, vol. 98, pp. 23-78
- O'Rourke, P. J., 1981, 'Collective Drop Effects on Vaporising Liquid Sprays,' Ph D Thesis, Princeton University
- Reitz, R. D. and Diwakar, R., 1986, 'Effect of Drop Breakup on Fuel Sprays,' SAE Paper No. 860469
- Saito, A., Kawamura, K., Watanabe, S., Takahashi, T., and Naoyuki, T., 1993, 'Analysis of Impinging Spray Characteristics under High-Pressure Fuel Injection (1st Report, measurements of impinging spray Characteristics),' Trans, Jap. Soc. Mech. Engrs. B, Vol. 59, pp. 3290-3295 https://doi.org/10.1299/kikaib.59.3290
- Sarre, C., Kong, S. and Reitz, R. D., 1999, 'Modeling the Effects of Injector Nozzle Geometry on Diesel Sprays,' SAE Paper No. 1999-01-0912
- Senda, J., Yamada, K., Fujimoto, H., and Miki, H., 1988, 'The Heat-Transfer Characteristics of a Small Droplet Impinging upon a Hot Surface,' JSME Int. Journal, Series II, Vol. 31, No. 1, pp. 105-111
- Senda, J., Kobayashi, M., Iwashita, S., and Fujimoto, H., 1994, 'Modeling of Diesel Spray Impingement on Flat Wall,' Int. Symp. COMODIA 94, pp. 411-416
- Stanton, D. W. and Ruthland, C. J., 1996, 'Mathematical Modeling of Wall Films Formed by Impinging Sprays,' SAE paper No 960628
- Werlberger, P. and Cartellieri, W. P., 1987, 'Fuel Injection and Combustion Phenomena in High Speed DI Diesel Engine Observed by Means of Endoscopic High Speed Photography,' SAE Paper No. 870097
- Yarin, A. L. and Weiss, D. A., 1995, 'Impact of Drops on Solid Surfaces: Self-Similar Capillary Waves, and Splashing as a New Type of Kinematic Discontinuity,' J. Fluid Mech, Vol. 283, pp. 141-173 https://doi.org/10.1017/S0022112095002266