참고문헌
- Erdogan, F. and Sih, G. C., 1963, 'On the Crack Extension in Plates under Plane Loading and Transverse Shear,' J. Basic Engng., Trans. ASME Vol. 85, pp. 519-527 https://doi.org/10.1115/1.3656897
- 조명래, 최용식, 양원호, 1993, '균열의 두께가 변화하는 부재내의 혼합모드(모드 I/II) 응력확대 계수,' 대한기계학회논문집, Vol. 17, No. 8, pp. 1875-1882
- 정남용, 장진모, 1997, 'Al/Steel 이종재료의 접착이음에 대한 혼합모드의 파괴기준,' 대한기계학회논문집 A, Vol. 21, No. 8, pp. 1322-1331
- 이억섭, 류황희, 김동준, 1999, '혼합모드하중에서의 피로균열전파 방향과 피로수명 예측,' 대한기계학회논문집 A, Vol. 23, No. 9, pp. 1550-1558
- Williams, M. L. , 1957, ' On the Stress Distribution at the Base of a Stationary Crack,' J. Appl. Mech., Vol. 24, No. 1, pp. 109-114
- ASTM STANDARD E647-00, 2000, 'Standard Test Method for Measurement of Fatigue Crack Grawth Rates,' Annual Book of ASTM Standards
- Rook , D.P. and Cartwright, D. J., 1976, 'Compendium of Stress Intensity Factors,' London Her Majesty's Stationery Office by The Hillingdon Press, pp. 74-75
- Magill, M. A. and Zwerneman, F. J. ,1999, 'Sustained Mode I and Mode II Fatigue Crack Growth in Flat Plates,' Engng. Frature Mech., Vol. 55, No. 6, pp.883-899 https://doi.org/10.1016/S0013-7944(96)00078-1
- Paul, T. K., 1995, 'Plane Stress Mixed Mode Fatigue Crack Propagation,' Engng. Fracture Mech., Vol. 52, No. 1 pp. 121-137 https://doi.org/10.1016/0013-7944(94)00256-H
- Abdel Magged, A.M. and Pandey, R. K., 1991, 'Mixed Mode Crack Growth under Static and Cyclic Loading in Al-alloy Sheets,' Engng. Fracture Mech., Vol. 40, No. 2, pp. 371-385 https://doi.org/10.1016/0013-7944(91)90271-2
- Pustejovsky, M. A., 1979, 'Fatigue Crack Propagation in Titanium under General In-Plane Loading-I:Experimentals,' Engng. Fracture Mech., Vol. 11, pp. 9-15 https://doi.org/10.1016/0013-7944(79)90025-0
- Williams, J. G. and Ewing, P. D., 1972, 'Fracture under Complex Stress - The Angled Crack Problem,' Int. J. of Fracture Mech., vol. 8, No. 4, pp. 441-446
- Sih, G. C., 1974, 'The Strain-Energy-Density Factor Applied to Mixed Mode Crack Problems,' Int. J. of Fracture, Vol. 10, No. 3, pp. 305-321 https://doi.org/10.1007/BF00035493
- Yokobori, A. T. Jr, Yokobori, T. , Sato, K. and Syoji, K., 1985, 'Fatigue Crack Growth under Mixed Modes I and II,' Fatigue Fract. Engng Mater. Struct., Vol. 8, No. 4, pp. 315-325 https://doi.org/10.1111/j.1460-2695.1985.tb00430.x
- Sih, G.C. and Barthelemy, B.M., 1980, 'Mixed Mode Fatigue Crack Growth Prediction,' Engng. Fracture Mech., Vol. 13, pp. 439-451 https://doi.org/10.1016/0013-7944(80)90076-4
피인용 문헌
- Estimation of Fatigue Crack Growth Behavior of Cracked Specimen Under Mixed-mode Loads vol.39, pp.7, 2015, https://doi.org/10.3795/KSME-A.2015.39.7.693