대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제26권4호
  • /
  • Pages.745-753
  • /
  • 2002
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

레이저 유도 초음파 및 자기보상 기법을 이용한 재료의 표면균열 깊이 비파괴 평가

Evaluation of Depth of Surface-breaking Slit by Nondestructive Self-calibrating Technique Using Laser Based Ultrasound

  • 발행 : 2002.04.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

It is required to evaluate nondestructively the crack depth of surface-breaking cracks for the assurance of safety of structure. Optical generation of ultrasound produces well defined pulses with a repeatable frequency content, that are free of any mechanical resonances; they are broad band and are ideal for the measurement of attenuation and scattering over a wide frequency range. Self-calibrating surface signal transmission measurement is very sensitive and practical tool for surface-breaking crack depth. In this paper, the self-calibrating technique by laser-based ultrasound is used to evaluate the depth of surface-breaking crack of material. It is suggested that the relationship between the signal transmission and crack depth can be used as a practical model for predicting the surface-breaking crack depths from the signal transmission measured in structure.

키워드

참고문헌

  1. Wu, T. T., Fang, J. S. and Liu, P. L., 1995, 'Detection of the Depth of a Surface-Breaking Crack Using Transient Elastic Waves,' Journal of Acoustic Society of America, Vol. 97, No. 3, pp. 1678-1685 https://doi.org/10.1121/1.412045
  2. 이준현, 최상우, 2000, '저면산란 초음파 신호 및 신경회로망을 이용한 균열크기 결정,' 대한기계학회논문집A권, 제24권, 제1호, pp. 52-61
  3. Scruby, C. B., Dewhurst, R. J., Hutchins, D. A. and Palmer, S. B., 1980, 'Quantitative Studies of Thermally Generated Elastic Waves in Laser-Irradiated Metals,' J. Appl. Phys., Vol. 51, No. 12, pp. 6210-6216 https://doi.org/10.1063/1.327601
  4. 이민래, 최상우, 이준현, 2001, '레이저 초음파와 Wavelet변환을 이용한 재료표면균열 평가,' 비파괴검사학회지, Vol. 21, No. 2, pp. 152-162
  5. Lee, J. H., Song, W. J., Popovics, J. S. and Achenbach, J. D., 1997, 'An Automated Method for the One-Sided Measurement of Longitudinal and Surface Wave Velocities in Concrete,' Proceedings of the Korea Concrete Institute, Vol. 9, No. 1, pp. 537-543
  6. 박원수, 1998, 'One-sided Technique에 의해 발생된 응력파를 이용한 재료 내부 균열평가,' 부산대학교 대학원 기계설계공학과 석사학위 논문
  7. Popovics, J. S., Lee, J. H., Song, W. J. and Achenbach, J. D., 1998, 'One-sided Stress Wave Measurement in Concrete,' J. of Eng. Mechanics, Vol. 124, No. 12, pp. 1346-1353 https://doi.org/10.1061/(ASCE)0733-9399(1998)124:12(1346)
  8. Lee, J. H., Park, W. S, Popovics, J. S. and Achenbach, J. D., 1999, 'Application of One-sided Stress Wave Velocity Measurement Technique to Evaluate Freeze-Thaw Damage in Concrete,' Review of Progress in Quantitative Nondestructive Evaluation, Vol. 18, pp. 1935-1942
  9. Achenbach, J. D., Komsky, I. N., Lee, Y. C. and Angel, Y. C., 1992, 'Self-Calibrating Ultrasonic Technique for Crack Depth Measurement,' Journal of Nondestructive Evaluation, Vol. 11, No. 2, pp. 103-108 https://doi.org/10.1007/BF00568293
  10. Achenbach, J. D., 1973, 'Wave Propagation in Elastic Solids,' Northholland, New York, pp. 187-194
  11. Angel, Y. C. and Achenbach, J. D., 1984, 'Reflection and Transmission of Obliquely Incident Rayleigh Waves by a Surface-Breaking Crack,' Journal of Acoustic Society of America, Vol. 75, No. 2, pp. 313-319 https://doi.org/10.1121/1.390473

피인용 문헌

  1. Ultrasonic signal analysis according to laser ultrasound generation position for the detection of delamination in composites vol.29, pp.12, 2015, https://doi.org/10.1007/s12206-015-1121-y