Analysis of Mechanical Stress Due to Magnetic Force and Thermal Expansion in Brsushless Motor

브러시레스 전동기에서 전자기적 가진력 및 열에 의한 기계적 음력해석

  • 하경호 (창원대 공대 전기공학과) ;
  • 홍정표 (창원대 공대 전자공학과) ;
  • 이근호 (창원대 공대 전자공학과)
  • Published : 2002.05.01

Abstract

This paper deals with the mechanical stress analysis due to electromagnetic forces and the optimal design of the link considering the stress. The link in Interior Permanent Magnet Brushless Motor(IPM) have influence on both mechanical and magnetic performance. The decrease of the link thickness serves to improve the torque, whereas this decreases the strength of link. Therefore, it is necessary to determine the appropriate link thickness considering electromagnetic forces and thermal expansion. The effects of the variation of link thickness on the mechanical stress and the electromagnetic performance are analyzed by the structural and electromagnetic Finite Element Method. In addition, the mechanical structure design of the link is performed to reinforce the mechanical strength against magnetic forces while preserving a food magnetic torque.

Keywords

References

  1. B. S. Rahman and D. K. Lieu, 'The origin of permanent induced vibration in eletric machines,' ASME, Journal of Vibration and Acoustics, Vol. 113, No.4, pp. 476-481, 1991 https://doi.org/10.1115/1.2930211
  2. J. P. Hong et al., 'Dynamic analysis of radial force density in brushless DC motor using 3-D equivalent magnetic circuit network method,' Procd. of COMPUMAG RIO, pp.291-292, 11, 1997
  3. J. P. Hong et al., 'Analysis of radial force as a source of vibration in an induction motor with skewed slots,' IEEE Trans. on Magnetics, Vol. 33, No.2, pp. 1650-1653, 1997 https://doi.org/10.1109/20.582587
  4. J. P. Hong et al., 'Coupled electromagnetic force and vibration analysis of switched reluctance motor According to Switching Scheme,' Nonlinear Electromagnetic System, Vol.18, pp.363-366, 2000
  5. J. P. Hong et al., 'Orbital analysis of rotor due to unbalance electromagnetic force for switched reluctance motor', IEEE Trans. on Magnetics, Vol. 36, No.4 July, pp. 1407-1411,2000 https://doi.org/10.1109/20.877702
  6. D. G. Dorrell, W. T. Thomson, S. Roach, 'Analysis of airgap flux, current, and vibration signals as a function of the combination of static and dynamics airgap eccentricity in 3-phase induction motors,' IEEE Trans. on Industry application, Vol. 33, No.1, pp. 24-34. 1997 https://doi.org/10.1109/28.567073
  7. F. Ishibashi, S. Noda, 'Frequencies and modes of electromagnetic vibration of a small induction motor,' T.IEE Japan, Vol. 116-D, No. 11, pp. 1110-1115, 1996
  8. P. Pillay and W. Cai, 'An investigation into vibration in switched reluctance motors,' IEEE Trans. on Industry application, Vol. 353, pp. 589-596, 1999 https://doi.org/10.1109/28.767007
  9. IEEE Trans.on Industry application v.32 no.6 Vibration modes and acoustic noise in a four-phase switched reluctance motor R. S. Collby;F. M. Moittier;T. J. E. Miller https://doi.org/10.1109/28.556639
  10. R. S. Collby, F. M. Moittier, T. J. E. Miller, 'Vibration modes and acoustic noise in a four-phase switched reluctance motor,' IEEE Trans. on Industry application, Vol. 32, No.6, pp. 1357-1364, 1996 https://doi.org/10.1109/28.556639
  11. C.G.C, Neves et al., 'Vibrational behavior of switched reluctance motors by simulation and experimental procedures,' IEEE Trans. on Magnetics, Vol. 32, pp. 3158-3159, 1998 https://doi.org/10.1109/20.717740
  12. D. E. Cameron, J. H. Lang, S. D. Umans, 'The origin and reduction of acoustic noise in doubly salient variable-reluctance motors,' IEEE Trans. on Industry application, Vol. 28, No.6, pp. 1250-1255, 1992 https://doi.org/10.1109/28.175275
  13. C. Pollock and C. Y. Wu, 'Acoustic noise cancellation techniques for switched reluctance drives,' IEEE Trans. on Industry application, Vol. 33, pp. 477-484, 1997 https://doi.org/10.1109/IAS.1995.530334
  14. B. M. Kwak, J. S. Han, Y. G. Choi, 'Shape optimization of an Induction motor frame for vibration reduction,' ASEM, Journal of Vibration and Acoustics, Vol. 119, No. 4, pp. 180-181, 1997 https://doi.org/10.1115/1.2889700
  15. R. S. Colby, F. M. Mottier and T. J. E. Miller, 'Vibration modes and acoustic noise in a four-phase switched reluctance motor,' IEEE Trans. on Industry application, Vol. 32, pp. 1357-1364, November/December, 1996 https://doi.org/10.1109/28.556639
  16. C. Picod, M. Besbes, Camus and M. Gabsi, 'Influence of stator geometry upon vibratory behaviour and electromagnetic performance of switched reluctance motors', IEE Proc. Electr Power Appl., Vol. 145, pp. 462-468, September 1998 https://doi.org/10.1049/ip-epa:19982163
  17. A. Strassis and A. M. Michaelides, 'The design of low vibration doubly salient motors,' Electric Machines and Power Systems, Vol. 27, pp. 967-981, 1999 https://doi.org/10.1080/073135699268812
  18. T. M. Jahns, 'Flux-weakening regime operation of an interior permanent magnet synchronous motor drive,' IEEE Trans. on Industry applicatioons, Vol 23, No.4, pp. 681-689, 1987 https://doi.org/10.1109/TIA.1987.4504966
  19. T. M. Jahns, 'Interior permanent magnet synchronous motors for adjustable-speed drives,' IEEE Trans. on Industry application, Vol 22, No.4, pp. 738-745, 1986 https://doi.org/10.1109/TIA.1986.4504786
  20. Z. Zhang. F. Profumo, A. Tenconi, 'Axial flus Interior PM synchronous motor torque performance analysis for traction drives,' T. IEE Japan, Vol 116-D, No. 12, pp. 1246-1253, 1996
  21. V. B. Honsinger, 'The field and parameters of interior type AC permanent magnet machines,' IEEE Trans. on Power apparatus and system, Vol PAS-101, No.4, pp. 867-876, 1982 https://doi.org/10.1109/TPAS.1982.317152
  22. J. P. Hong, et al. 'Improved parameters modelling of interior permanent magnet synchronous motor based on finite element analysis,' IEEE Trans. on Magnetics, Vol. 36, No.4, pp. 1867-1870, 2000 https://doi.org/10.1109/20.877809
  23. G. Henneberger, K. Sattler, D. Shen, 'Nature of the equivalent magnetizing current for the force calculation,' IEEE Trans. on Magnetics, Vol. 28, pp, 1068-1072, 1992 https://doi.org/10.1109/20.123866
  24. T. Kabashima et al. 'Force calculation using magnetizing current,' IEEE Trans. on Magnetics, Vol 24, No. 1, pp. 451-454, 1988 https://doi.org/10.1109/20.43954
  25. G. Henneberger et al. 'Nature of the equivalent magnetizing current for force calculation,' IEEE Trans. on Magnetics, Vol 28, No. 28, pp.1068-1071, 1992 https://doi.org/10.1109/20.123866
  26. G. Henneberger et al. 'Procedure for the numerical computation of mechanical vibrations in electrical machines,' IEEE Trans. on Magnetics, Vol 28, No.2, pp.1351-1354, 1992 https://doi.org/10.1109/20.123942
  27. Gere & Timoshenco, Mechanics of materials, International Thomson Publishing, Asia, 1995
  28. T. J. Lardner, R. R. Archer, Mechanics of Solids, McGraw Hill, 1994
  29. Logan, Daryl L., A first course in the finite element method, PWS-KENT Publishing Company, Boston, 1992