Composites Research

  • 제15권1호
  • /
  • Pages.61-69
  • /
  • 2002
  • /
  • 2288-2103(pISSN)
  • /
  • 2288-2111(eISSN)
한국복합재료학회 (The Korean Society for Composite Materials)
권호 표지

일본내 연구동향(6편중 제 2편)

Some Aspects of Mechanical Test Methods for Advanced Composites

  • Fukuda, Hiroshi (Department of Materials Science and Technology, Tokyo University of Science) ;
  • Wada, Atsushi (Department of Materials Science and Technology, Tokyo University of Science)
  • 발행 : 2002.02.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper review research activities of some mechanical test methods thor advanced composites which have been conducted in Fukuda laboratory. Tokyo University of Science. The subjects are (1) innovation and development of compression bending test. (2) mechanical-property evaluation of soft-core sandwich beam, and (3) loop test to measure the strength of monofilaments.

키워드

참고문헌

  1. Composites Sci. Tech. v.22 Elasticity analysis of orthotropic beams under concentrated loads Witney, J. M. https://doi.org/10.1016/0266-3538(85)90031-4
  2. Composites Sci. Tech. v.45 Contact finite element analysis of three- and four- point short-beam bending of unidirectional composites Cui, W.-C.;M. R. Wisnom https://doi.org/10.1016/0266-3538(92)90047-7
  3. Experimental Mechanics v.29 A new bending test method of advanced composites Fukuda, H. https://doi.org/10.1007/BF02321417
  4. J. Japan Soc. Aero. Space Sci. v.41 Compression bending test method for advanced composites Fukuda, H.
  5. J. Composite Mater. v.29 A modified procedure to measure bending strength and modulus of advanced composites by means of compression bending Fukuda, H.;H. Katoh;H. Usesugi https://doi.org/10.1177/002199839502900204
  6. Composites v.30 Simplified compression bending test method for advanced composites Fukuda, H.;M. Itabashi https://doi.org/10.1016/S1359-835X(98)00160-2
  7. Proc. ACCM-2000, Kyongju, Korea Compression bending test method for CFRP pipe Fukuda, H.;T. Watanabe;M. Itabashi
  8. Proc. 16th Tech. Conf. of the American Soc. for Composites, paper number 028 Compression bending test for CFRP pipe Fukuda, H.;T. Watanabe;O. Watanabe;M. Itabashi;A. Wada
  9. Theory of Elastic Stability, (2nd ed.) Timoshenko, S. P.;J. M. Gere
  10. Proc. JISSE-7, Tokyo Big Sight Eccentric compression bending test for CFRP pipe Fukuda, H.;O. Watanabe;M. Itabashi;A. Wada
  11. Strength of Materials, (3rd ed.) Timoshenko, S.
  12. The behavior of sandwich Structures of Isotropic and Composite Materials Vinson, J. R.
  13. Journal of Sandwich Structures & Materials Vinson, J. R.(editor-in-chief)
  14. ASTM Standards, C 271-297, C-363-369, C-393-394, C-480-481 ASTM
  15. Proc. 9th US-Japan Conf. on Composite Mater. Bending test for CFRP skin/foamed core sandwich Plates Fukuda, H.;T. Kawasaki;A. Kataoka;S. Tashiro
  16. Proc. 2nd Korea-Japan Joint Symp. on Composite Mater. Shearing modulus of foamed core for sandwich beams Wada, A.;T. Kawasaki;Y. Minoda;A. Kataoka;H. Fukuda
  17. J. Appl. Phys. v.21 A bending method for measurement of the tensile strength and Young;s modulus of glass fibers Sinclair, D. https://doi.org/10.1063/1.1699670
  18. J. Appl. Phys. v.41 Bending behavior and tensile strength of carbon fibers Williams, W. S.;D. A. Steffens;R. Bacon https://doi.org/10.1063/1.1658559
  19. Composites Sci. Tech. v.49 Compressive properties of high-performance polymeric fibers Fidan, S.;A. Palazotto;C. T. Tsai;S. Kumar https://doi.org/10.1016/0266-3538(93)90110-3
  20. Proc. 12th Symp. Composite Mater., Japan Soc. Composite Mater. Compressive strength of fiber reinforced composite materials -effect of fiber properties Kitano, A.;T. Norita;K. Noguchi
  21. Proc. ICCM-11. v.5 Loop test for the strength of monofilaments Fukuda, H.;M. Yakushiji;A. Wada
  22. Advanced Composite Mater. v.8 no.3 A Loop Test to Measure the Strength of Monofilaments used for Advanced Composites Fukuda, H.;M.Yakushiji;A.Wada https://doi.org/10.1163/156855199X00272
  23. J. Appl. Mech. v.18 A statistical distribution of wide applicability Weibull, W.
  24. ASTM C 393-94 Standard test method for flexural properties of sandwich plastes
  25. PhD Thesis, The University of Tokyo The Study for Stress Distribution and Improvement of Bending Rigidity on Sandwich Construction with Soft and Light Core Kemmochi, K.
  26. NACA TN 2245 Bending and buckling of retangular sandwich plates Hoff, N. J.
  27. catalog Toray Industris
  28. Advanced Composite Mater. v.4 Micromechanical approach to the tensile strength of undirectional composites Fukuda, H.;T. Miyazawa https://doi.org/10.1163/156855194X00231
  29. J. Mater. Sci. v.23 Strength distribution and gauge length extrapolations in glass fibre Phani, K. K. https://doi.org/10.1007/BF01154577