대한전기학회논문지:전기기기및에너지변환시스템부문B (The Transactions of the Korean Institute of Electrical Engineers B)

대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지

반응표면방법론을 이용한 BLDC전동기의 코깅토크 저감에 관한 연구

A study on Reduction of Cogging Torque for BLDC Motor Using Response Surface Methodology Optimization

  • 발행 : 2002.02.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents an optimization procedure by using Response Surface Methodology(RSM) to determine design parameters for reducing cogging torque. RSM is achieved through using the experimental design method in combination with Finite Element Method and adapted to make analytical model for a complex problem considering a lot of interaction of these parameters. Sequential Quadratic Problem (SQP) method is used to solve the relsulting of constrained nonlinear optimization problem.

키워드

참고문헌

  1. Y. K. Kim, Y. S. Jo, J. P. Hong, J. Lee, 'Approach to the shape optimization of racetrack type high temperature superconducting magnet using response surface methodology,' Cryogenics, vol. 41/1, pp.39-47, 2001 https://doi.org/10.1016/S0011-2275(01)00046-7
  2. R. Rong, D. A. Lowther, 'Applying response surface methodology in design and optimization of electromagnetic devices, IEEE Trans. Magn., vol. 33, No. 2, pp. 1916-1919, Mar. 1999 https://doi.org/10.1109/20.582665
  3. Gillon 외 1명, 'Shape Optimization of a Permanent Magnet Motor Using the Experimental Design Method', IEEE Trans. on Magn., Vol.35, No.3, pp.1278-1281, May 1999 https://doi.org/10.1109/20.767184
  4. S. X. Chen, T. S. Low, B. Bruhl, The robust design approach for reducing Cogging Torque in Permanent Magnet Motors, IEEE Trans. Magn., vol. 34, No. 4, pp. 2135-2137, Jul. 1998 https://doi.org/10.1109/20.706828
  5. R. H. Myers, Response Surface Methodology, John Wiley & Sons, 1995
  6. M. Alauddin et al., Prediction of tool life in end milling by response surface methodology, Journal of Materials Processing Technology, 71, pp456-465,1997 https://doi.org/10.1016/S0924-0136(97)00111-8
  7. F. Gillon, P. Brochet, Screening and response surface method Applied to the numerical optimization of electromagnetic devices, IEEE Trans. Magn., vol. 36, No. 4, pp. 1163-1167, Jul. 2000 https://doi.org/10.1109/20.877647
  8. J. S. Arora, Introduction to Optimum Design, McGraw Hill, 1989
  9. A. D. Belegundu, Optimization concepts and applications in engineering, Prentice Hall, 1999