A Study on the Optimal Pressure Curve for the Sheet Hydroforming

판재 액압성형 공정에서의 최적압력곡선에 관한 연구

  • Published : 2002.04.01


A simple method to derive an optimal pressure curve, characterized by initial pressure, final pressure and pressure path, has been proposed. The initial pressure has been determined from the condition to prevent recoiling phenomenon in the early stage, while the final pressure is from the FE analysis and pressure path is from the punch penetration volume. In order to realize the pressure curve, an open loop control system based on a proportional relief valve has been developed for the renovated CNC hydroforming press. Through the comparison of experiment and analysis, the predicted pressure curve has been verified optimal curve since no defect has been observed.



  1. Trans. ASME. J. Engr. for Ind. v.99 Hydroforming process for Uniform Wall Thickness Products J.Tirosh;S.Yossifon;R. Eshel;A. Betzur
  2. Int. J. Mech. Sci. v.26 On Suppression of Plastic Buckling in Hydroforming Process S.Yossifon;J. Tirosh;E. Kochani
  3. Int. J. Mech. Sci. v.29 Analysis of Hydroforming of Regular polygonal Boxes T. S. Noh;D. Y. Yang
  4. Journal of Manufacturing Science and Engineering v.120 A General Formulation for Hydroforming of Arbitrarily Shaped Boxes and Its Application to Hydroforming of an Elliptic-Circular Box T. S. Noh;D. Y. Yang
  5. 한국정밀공학회지 v.16 no.11 하이드로포밍 공정의 동특성 해석 및 시뮬레이션 이우호;조형석
  6. 제어.자동화.시스템공학 논문지 v.6 no.3 CMAC 제어 기법을 이용한 하이드로포밍 공정의 압력 제어기 설계 이우호;조형석
  7. Korea Advanced Institute of Science and Technology, Ph.D.dissertation A Fuzzy based Pressure Tracking Controller Design for Hydroforming Process M. J. Kim