소성∙가공 (Transactions of Materials Processing)

  • 제11권2호
  • /
  • Pages.138-146
  • /
  • 2002
  • /
  • 1225-696X(pISSN)
  • /
  • 2287-6359(eISSN)
한국소성∙가공학회 (The Korean Society for Technology of Plasticity and materials processing)
권호 표지
DOI QR코드

DOI QR Code

금속인장교정기의 공정변수 설계를 위한 탄소성 유한요소해석 (1)-단순모델 해석

Elasto-plastic Finite Element Analysis for the Parametric Process Design of the Tension Leveller(1) -Unit Model Analysis

  • 이형욱 (한국과학기술원 기계공학과) ;
  • 허훈 (한국과학기술원 기계공학과) ;
  • 박상래 (한국과학기술원 기계공학과)
  • 발행 : 2002.04.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper is concerned with the simulation-based process design method involved non-steady state problem of tension levelling considering the elasto-plastic hardening behavior of a metallic strip by a commercial code ABAQUS/Standard. The tension levelling process is peformed to elongate the strip plastically in combination of tensile and bending strain by a controlled manner so that all longitudinal fibers in the strip have an approximately equal amount of length and undesirable strip shapes are corrected to the flat share. Objectives of this paper are the development of a general method for the design of a tension leveller by a finite element method and parameter studies for the deisgn variables such as the applied tension, the roll intermash includes the determination of the steady state using the simple unit of the tension levelling line and the effect of the finite element mesh size on the amount and distribution of the strain calculated. The analysis provides the information about the intermesh effect on the amount and final shapes of the strip and distribution of the strain in order to determine the amount elongation for correction of the irregular share.

키워드

참고문헌

  1. Roberts, W. L., 1978, "Cold Rolling of Steel", Marcel Dekker, Inc., New York.
  2. Misaka, Y. and Masui, T., 1976, "Shape Correction of Steel Strip by Tension Leveller", J. JSTP, Vol. 17, No. 191, pp.988-994.
  3. Patula, E. J. 1979, "The Tension-Roller-Leveling Process-Elongation and Power Loss", J. Eng. Ind. Trans. ASME, Vol. 101, pp.269-277. https://doi.org/10.1115/1.3439507
  4. Hattori, S., Maeda, Y, Matsushita, T., Murakami S. and Hata, J., 1987, "Theoretical Evaluation of Effects of Roll Nwnber in Tension Levelling Machine", J. JSTP, Vol. 28, No. 312, pp.34-40.
  5. Hibino, F., 1990, "The Practical Formula for Levelling Strain in a Roller Leveler", J. JSTP, Vol. 31, No. 349, pp.208-212.
  6. Kawaguchi, K., 1980, "A Numerical Study on the Wrapping Angle of Strip in the Tension Roller Leveller", J. JSTP, Vol. 21, No. 236, pp.807-814.
  7. Kajiwara, T., Hururnoto, H., Takemasa, H. and Taniguchi, N., 1988, "Analysis of the Curling and Cross bowing of Strips on Tension Leveller," Technical Report in Mitsubishi Heavy Industry in Japanese, pp315-320.
  8. Yoshida, F. and Urabe, M., 1999, "Computer-aided Process Design for the Tension Levelling of Vol. Metallic Strips", J. Mater. Process Tech. Vol. 89-90, pp.218-223. https://doi.org/10.1016/S0924-0136(99)00034-5
  9. Huh, H., Lee, H. W., Park, S. R., Kim, G. Y. and Nam, S. H., 2001, "Parametric Process Design of the Tension Levelling with an Elasto-plastic Finite Element Method", J. Mater. Process Tech., 113, pp. 714-719. https://doi.org/10.1016/S0924-0136(01)00661-6
  10. 박상래, 이형욱, 허 훈, 2001, “탄소성 유한요소법을 이용한 금속인장교정기의 공정변수 설계”, 한국소성가공학회 추계학술대회, pp. 42-48.
  11. Hibbit, Karlsson and Sorensen, 1997, ABAQUS/Standard User's Manual.