Mechatronic V8 Engine Start Capabilities of an Automotive Starter/Generator System at the Super Cold Weather

  • 발행 : 2002.07.01

초록

The use of a combined starter/generator integrated into the drive train of an automobile offers several possibilities for improvement of fuel economy The use of such a starter/generator system is made feasible by a switch from a 14 volts electrical system to a 42 volts system, however, the sizing of the components is not a trivial problem. This study combines a dynamic electromechanical model of the starter, battery and power electronics with the nonlinear mechanics of the piston/crankshaft system and a thermofluid model of the compression and expansion processes to investigate the cold start problem. The example involves the start of an eight cylinder engine at -25 degrees Celsius. This paper shows how the mechatronic V8 engine of an automotive starter/generator system for the startability works well.

키워드

참고문헌

  1. ACSL Reference Manual, Version 10.1, MGA Software, Concord, MA 10742, USA, 1993
  2. E-maschine im Antriebss trang (Electrical Machines in the drive train) LUK Fachtagung, (Technical Conference of LUK Automotive Systems), Krauss, Markus, Daimler Chrysler Technical Note TN-FT2/L-1999.014
  3. Joo S. H. and Chun K. M., 2000, 'Idle Speed Modeling and Optimal Control of a Spark-Ignition Engine,' KSME International Journal, Vol. 11, No. 1, pp. 88-95
  4. Jurng J. S., Hur N. K., Kim K. H. and Lee C. S., 2000,000'Flow Analysis of Engine Cooling System for a Passenger Vehicle,' KSME International Journal, Vol. 11, No. 1, pp. 88-95
  5. Karnopp, D. C., Margolis, D. L. and Rosenberg, R. C., 2000, System Dynamics: Modeling and Simulation of Mechatronics Systems, John Wiley & Sons
  6. Kim H. S. and Sung N. W., 2001, 'Multidimensional Engine Modeling: NO and Sool Emissions in a Diesel Engine with Exhaust Gas Recirculation,' KSME International Journal, Vol. 15, No. 8, pp. 1196-1204 https://doi.org/10.1007/BF03185100
  7. Kuebler, R. and Schielen, W., 2000, 'Two Methods of Simulator Coupling,' Mathematical and Computer Modeling of Dynamic Systems, Vol. 6, No. 2, pp. 93-114 https://doi.org/10.1076/1387-3954(200006)6:2;1-M;FT093
  8. Wu H. W. and Chiu H. W., 1988, 'A Study on the Characteristics of Heat Transfer in an Engine Piston,' KSME International Journal, Vol. 2, No. 1, pp. 19-27 https://doi.org/10.1007/BF02944072
  9. Yang H. C. and Park S. K., 2001, 'A Study on the Behavior and Heat Transfer Characteristics of Impinging Sprays,' KSME International Journal, Vol. 15, No. 3, pp. 374-383 https://doi.org/10.1007/BF03185221