여자전류에 따른 저온초전도전원장치의 3차원 정자계 유한요소 시뮬레이션

3-D Magnetostatic Finite Element Simulation of a Low-Tc Superconducting Power Supply with Respect to the Excitation Current

  • 배덕권 (연세대학 전기전자공학과) ;
  • 김호민 (연세대학 전기전자공학과) ;
  • 이찬주 (연세대학 전기전자공학과) ;
  • 윤영수 (안산공과대학 전기과.) ;
  • 이상진 (위대학 전기공학과.)
  • 발행 : 2002.07.01

초록

In this paper, 3-D magnetostatic finite element simulation of a rotux type Low-Tc superconducing (LTS) superconducting power supply, finite element method, cryogenic system, superconducting foil by generated magnetic flux from the rotating pole. The magnetic flux density on the superconducting foil caused by two exciters is therefore sufficiently greater than its critical magnetic flux density and it is an essential point in LTS power supply design. To establish the sufficient flux path of this machine, ferromagnetic materials is used in this power supply. When ferromagnetic materials is used at extremely low temperature, its characteristic of magnetization differs to that at room temperature. For this reason, special consideration is needed in the magnetic analysis of cryogenic systems. When the excitation current is 10A, the normal spot appears on superconducting foil. The results of this analysis are calculated and compared with the experimental results. The linkage flux due to the excitation current of 10, 20, 30, 40 and 50A are respectively $1.30{\times}10-4$, $2.67{\times}10-4$, $5.08{\times}10-4$ and $6.15{\times}10-4Wb$.

키워드

참고문헌

  1. Tae Kuk Ko and Osman K. Mawardi 'Parametric representation of a superconducting high-current generator', Magnetics, IEEE Transactions on , Volume: 25 Issue: 5, pp. 4346-4349, sept. 1989 https://doi.org/10.1109/20.42602
  2. David K. Cheng, Field and Wave Electromagnetics, Addison Wesley, pp. 226-234, 1989
  3. Jianming Jin, The Finite Element Method in Electromagnetics, John Wiley & Sons, pp.151-158, 1993
  4. Q. S. Ma, K. R. Shao and J. D. Lavers, 'Axisym-metrical Magnetostatic Field Computation by a Hybrid Finite Element-Series Method', IEEE Transaction on Magnetics, Vol. 32, No. 5, pp. 4314-4316, September 1996 https://doi.org/10.1109/20.538854
  5. Rose-Innes and E. Rhoderick, Introduction to Super-conductivity, Oxford : Pergamon Press, pp. 3-15, 1992
  6. Joonhan Bae, Yunsang Oh, Sangjin Lee, Tae Kuk Ko, 'The Disign, Manufacture and Characteristic Experiment of a Superconducting Excitation Coil', IEEE Transaction on Applied Superconductivity, Vol7, No. 2, pp. 672-675, June 1997 https://doi.org/10.1109/77.614593
  7. Richard M. Bozorth, Ferromagnetism, IEEE Press, pp. 56-60, 476-479, 1993