모자형 단면부재의 압괴특성 연구

A Study on Crushing Characteristic of Hatted Section Tube

  • 김천욱 (연세대학교 기계공학과) ;
  • 한병기 (홍익대학교 기계·시스템디자인공학과) ;
  • 김병삼 (연세대학교 기계공학과 대학원)
  • 발행 : 2002.03.01

초록

In the frontal collision of cars, front parts of cars such as engine rail and side members that are composed of hatted section tubes should absorb most of the collision energy far the passenger compartment not to be deformed. For these reasons the study on the collapse characteristics, maximum crushing load and energy absorption capacity of hatted section tubes are needed. In this study, top hatted section tubes and double hatted section tubes are investigated. The maximum crushing load of hatted section tubes is induced from plastic buckling stress of plates by considering that the hatted section tubes are composed of plates with each different boundary conditions and that its material has a strain hardening effect. On this concept maximum crushing load equations of hatted section tubes are derived and verified by experiments. from the results of experiment, the differences of collapse characteristics between top hatted section tube and double hatted section tube are analysed. And mean crushing loads of hatted section tubes from experiments are compared with other theory.

키워드

참고문헌

  1. 49 CFR, Part 571, FMVSS 208, Occupant Crash Protection, DOT, NHTSA, USA
  2. C. J. Kahane, 'Correlation of NCAP Performance with Fatality Risk in Actual Head-On Collision,' Report No. DOT HS 808 061, Washington
  3. Directive 96/79/EC, The Protection of Occupants of Motor Vehicles, Official Journal of the European Communities, 1996
  4. S. T. Timoshenko, J. M. Gere, Theory of Elastic Stability, 2nd Edition, McGraw-Kill Book Co., New York, 1961
  5. F. Bleich, Buckling Strength of Metal Structures, McGraw-Hill Book Co., New York, 1952
  6. G. Gerard, Introduction to Structural Stability Theory, McGraw-Hill Book Co., New York, 1962
  7. C. L. Magee, P. H. Thornton, 'Design Considerations in Energy Absorption by Structural Collapse,' SAE 780434, 1978
  8. N. Aya, K. Takahashi, 'Energy Absorption Characteristics of Vehide Body Structure,' Transactions of the Society of Automotive Engineers of Japan, No.7, 1974
  9. W. Abramowicz, 'The Effective Cruishing Distance in Axially Compressed Thin-Walled Meta Columns.' Int J. Impact Eng., Vol.1, No.3, pp.309-317, 1983 https://doi.org/10.1016/0734-743X(83)90025-8
  10. E. Z. Stowell, 'A Unified Theory of Plastic Buckling of Columns and Plates,' NACA Technical Note, No.1556, 1948
  11. W. Ramberg, W. R. Osgood, 'Description of StressStrain Curves by Three Parameters,' NACA TN 902, 1943
  12. 김천욱, 한병기, 김종민, '압축하중을 받는박판4각튜브의 소성좌굴 연구,' 대한기계학회 2000년 춘계학술대회. 2000
  13. M. Tani. A. Funahashi. 'Energy Absorption by the Plastic Deformation of Body Structural Members, 'SAE 780368, 1978
  14. 김종민, '모자형 단면부재의 압괴특성 연구,' 연세대학교 대학원 석사학위 논문, 2000
  15. M. D. White, N. Jones, W. Abramowicz, 'A the Oretical Analysis for the Quasi-static Axial Crushing of Top-hat and Double-hat Thin-walled Sections,' International Journal of Mechanical Sciences 41, pp.209-233. 1999 https://doi.org/10.1016/S0020-7403(98)00048-4