References
- 發破ハンドブック, 1976, 山海堂
- Bhandari, S, 1974, Blasting In non-homogeneous rocks, Australian Mining Engineering Department, Queens University, Kingston, Ontario
- Bieniawski Z.T, 1973, Engineering classification of jointed rock masses. Trans S Afr. Inst. Civ. Eng. vol. 15, pp335-344
- Bieniawski Z.T, 1974, Estimating the strength of rock materials. J.S. Afr. Inst. Min. Metall. vol. 74, 312-320
- Bieniawski Z.T., 1989, Engineering rock mass classifications, Wiley, New York, 251p
- British Standard Institution, 1981, Code of practice for site investigations, BS 5930, HMSO, London
- Broch E.M. & Franklin J.A., 1972, The point load strength test, Int. J. Rock Mech. Min. Sci. vol.9, pp669-697
- Brown E.T., Richards L.R. & Barr M.V., 1977, Shear strength characteristics of the Delabole Slates, In: Procd Conf. Rock Engineering Newcastle upon Tyne, pp35-51
- Chakraborty A.K, jethwa J.L, and Dhar B.B., 1997, predicting powder factor in mixed face condition: development of a correlation based on investigation in a tunnel through basaltic flowers, Eng. Geol., vol.47, pp31-41
- Coates D.F., 1964, Classification of rock for rock mechanics, Int. J Rock Mech. Min. Sci. vol.1, pp421-429
- Colback P.S.B. & Wild B.L., 1965, The influence of moisture content on the compressive strength of rock, In: Procd Symp, Rock Mech. Canadian Dept. Min. Tech. Survey, Ottawa, pp65-83
- Deere D.U. & Miller R.P., 1966, Engineering classification and index properties of intact rock, Air Force Lab. Tech. Rep AFNLTR-65, 116, Albuquerque NM
- Franklin LA, 1974, Rock Quality in relation to the quarrying and performance of rock construction materials, Proc. 2nd Int. Cong. Int. Assoc. Eng. Geol., Paper IV-PC-2, pp.11
- Franklin J.A, Broch E. and Walton G., 1972, Logging the mechanical character of rock, Trans. Inst. Minning Metallurgy, A80, A1-A9 and discussion A81, A34, A51
- From, T, 1976, Model scale blast experiments in jointed materials, Swedish Detonic Research Foundation, Report DS 1976, 11
- Ghose, A.K. and N.M. Raju, 1981, Characterization of rock mass vis-a-vis application of rock bolting in India coal measure, Proc. 22nd U.S. Symp. Rock Mech., MIT, Cambridge, MA, pp.422-427
- Ghose, S.A, 1988, Designs of drilling and blasting subsystems A rock mass classification approach, Mine planning and equipment selection, Balkema
- Hawkins A.B., 1998, Aspects of rock strength, Bull. Eng. Geol. Env., vol. 57, pp17-30
- Hino, K, 1959, Theory and practice of blasting, Nippon Kayaku Co. Ltd
- Hoek E. & Brown E.T., 1980, Underground excavations in rock, Inst. Min. Metall., London
- Hoek E, Brown E.T, 1997, Practical estimates of rock mass strength. Int J Rock Mech. Min. Sci. vol. 34, pp1165-1186
- Hudson J.A, 1989, Rock mechanics principles in engineering practice, CIRIA. Ground Engineering Report: Underground Construction, Butterworths, Oxford
- Innaurato, N., R. Mancini & M. Cardu, 1988, On the influence of rock mass quality on the quality if blasting work in tunnel driving, Tunnelling and Underground Space Technology, Vol.13, No.1, pp.81-89
- Kirsten, H.A.D., 1982, A classification for excavation in natural materials.', Civ. Eng. S. Afr., pp.293-307
- Kirsten, H.A.D., 1982, Proced. Symp, Rock class eng. purpose, ASTM, Special technical publication 984, pp.102-120
- IAEG. 1979, Report of the commission on engineering geological mapping, Bull. IAEG, vol.19, pp364-371
- Iliev, I.G., 1966, An attempt to estimate the degree of weathering of intrusive rocks from their physico-mechanical properties, Proc. 1st Cong. Int. Soc. Rock Mech., Lisbon, pp 109-114
- ISRM, 1981, Brown E.T.(ed), Suggested methods for rock characterization, testing and monitoring. Pergamon Press
- Kendorski, F.S., Cummings, R.A, Bieniawski, Z.T. & Skinner, E.H., 1977, Rock mass classification for block caving mme drift support, Proced. 15th Int. Cong. Rock Mech. ISRM, ppB101-113
- Lilly, P.A, 1986, An empirical method of assessing rock mass blastability, Julius Kruttschnitt Mineral Research Center
- Olivier, H.J. 1976, Importance of rock durability in the engineering classification of Karoo rock masses for tunneling. In Z.T. Bieniawskited.), Exploration for rock engineering, Balkema, Rotterdam, vol.1, pp.137-144
- Protodyakonov M.M., 1962, Mechanical properties and drillability of rocks, Proceedings Symp. on Hock Mechanics, Univ. of Minn
- Romana R.M., 1985, New adjustment ratings for application of Bieniawski classification to slopes, Proc. Int. Symp, on the role of rock mechanics, Zactecas, pp.49-53
- Serafim, J,L. & Pereira, J.P., 1983, Considerations on geomechanics classification of Bieniawski, Proc. Int. Symp. on Eng. Geol. and Undergo Constr. LNFC. Lisboa. vol.1, pp.II 31-II 42
- Shukla, A and W.L. Fourney, 1985, Explosively driven crack propagation across an interlace, Int. J. Rock Mech. Min. Sci. & Geomech. Abstr., V. 22, No.6, pp.443-451
- Singh, B. & P. Pal Roy et al., 1993, Blasting in ground excavation and mines, A.ABalkema, 117p
- Unal, E., 1983, Design guidelines and roof control standards for coal mine roofs, Ph.D thesis, Pennsylvania State University, University Park, 355p
- Weaver, J.M., 1975, Geological factors significant in the assessment of rippability, Civ. Eng. S. Afr.17, pp 313-316
- Wickham, G.E., H.R. Tiedemann and E.H Skinner, 1972, Support determination based on geologic prediction, Proc. Rapid Excav. Tunneling Conf., AIME, New York, pp.312-320