Journal of the Korean Ceramic Society (한국세라믹학회지)

The Korean Ceramic Society (한국세라믹학회)
권호 표지
DOI QR코드

DOI QR Code

Effect of Starting Material for MgG on the Mechanical Properties of Alumina Ceramics

알루미나 세라믹스의 기계적 특성에 미치는 MgO출발물질의 영향

  • 조용익 (전남대학교 공업기술연구소) ;
  • 정상귀 (전남대학교 공업기술연구소) ;
  • 조성용 (전남대학교 공업기술연구소) ;
  • 김승재 (전남대학교 공업기술연구소)
  • Published : 2002.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

The effect of kind of starting materials used for a sintering additive. magnesium acetate and magnesium nitrate, on the mechanical properties of alumina sintered body made by adding 1000 ppm of the additives, respectively, was investigated. As for the alumina sintered bodies prepared from magnesium acetate and magnesium nitrate, we observed that their relative densities decreased rapidly with increasing sintering temperature 1$600^{\circ}C$. Outer layer of alumina bodies had a duplex microstructure consisting of pores and grain growth. Also the inner layer had a second phase between alumina grain boundaries. By EPMA analysis, we confirmed that the grain boundary phase was a compound containing Mg.

고순도 알루미나 분말에 소결조제로서 초산 마그네슘과 질산 마그네슘을 1000ppm첨가하여 제작한 소결체에 대해서 소결조제로 사용한 MgO의 출발물질의 종류가 소결체 특성에 미치는 영향을 고찰하였다. 초산 마그네슘과 질산 마그네슘을 사용해서 제작한 소결체에 대해서 소결온도 1$600^{\circ}C$에서 상대밀도의 급격한 감소가 확인되었고 SEM관찰결과 소결조제로 사용한 두 종류의 출발물질을 첨가한 경우에 동일하게 소결체의 outer layer에서는 입성장 및 기공이 형성되어있고 inner layer에서는 알루미나 입계에 제2상의 존재가 관찰되었다. 이 시편의 EPMA을 이용한 원소분석결과로부터 소결온도 1$600^{\circ}C$에서 알루미나 입계에 존재하는 제2상은 Mg를 함유한 혼합물이라는 것을 알 수 있었다.

Keywords

References

  1. J. Am. Ceram. Soc. v.72 no.1 Powder Processing Science and Technology for Increased Reliability F. F. Lange https://doi.org/10.1111/j.1151-2916.1989.tb05945.x
  2. J. Am. Ceram. Soc. v.82 no.4 Defect Reaction and the Controlling Mechanism in the Sintering of Magnesium Aluminate Spinel C-J. Ting;H-Y. Lu https://doi.org/10.1111/j.1151-2916.1999.tb01844.x
  3. J. Am. Ceram. Soc. v.77 no.10 Critical Concentration of MgO for the Prevention of Abnormal Grain Growth in Alumina S. I. Bae;S. Baik https://doi.org/10.1111/j.1151-2916.1994.tb04634.x
  4. J. Am. Ceram. Soc. v.71 no.8 Effect of Sintering Atmosphere on Densification of MgO-doped $Al_2O_3$ Y. K. Paek;K. Y. Eun;S. J. L. Kang
  5. J. Am. Ceram. Soc. v.68 no.1 Grain-growth Kinetics for Alumina in the Absence of a Liquid Phase S. J. Bennison;M. P. Harmer
  6. J. Kor. Ceram. Soc. v.27 no.4 A Study on the Preparation and Sinterability of MgO-doped $Al_2O_3$ Powders by Spray Pyrolysis Method J. H. Park;K. S. Cho;K. H. Song
  7. J. Am. Ceram. Soc. v.72 no.1 Effects of Chemical Inhomogeneities on Grain Growth and Microstructure in $Al_2O_3$ C. A. Handwerker;P. A. Morris;R. L. Coble https://doi.org/10.1111/j.1151-2916.1989.tb05965.x
  8. J. Am. Ceram. Soc. v.70 no.5 Effect of a Liquid Phase on the Morphology of Grain Growth in Alumina W. A. Kaysser;M. Sprissler;C. A. Handwerker;J. E. Blendell https://doi.org/10.1111/j.1151-2916.1987.tb05005.x
  9. Am. Ceram. Soc. Bull. v.78 no.2 Effect of Seasons on Density, Strength of Alumina N. Shinohara;M. Okumiya;T. Hotta;K. Nakahira;M. Natio;K. Uematsu
  10. Mater. Trans. v.42 no.1 Relevance of the Fracture Strength to Process-related Defects in Alumina Ceramics M. Naito;T. Hotta;H. Abe;N. Shinohara;Y. I. Cho;M. Okumiya;K. Uematsu https://doi.org/10.2320/matertrans.42.114
  11. J. Kor. Ceram. Soc. v.38 no.5 Internal Structure and Weibull Modulus of $Al_2O_3$ Ceramics Sintered with Addition of MgO Y. I. Cho;S. K. Yoo;S. G. Chung;S. Y. Cho;S. J. Kim;M. Okumiya
  12. J. Ceram. Soc. Jpn. v.104 no.1 Influence of Spray-dry Slurry Flocculation on the Structure of Sintered Silicon Nitride H. Takahashi;N. Shinohara;K. Uematsu https://doi.org/10.2109/jcersj.104.59
  13. J. Am. Ceram. Soc. v.82 no.7 Influence of Slurry Parameters on the Characteristics of Spray-dried Granules W. J. Walker, Jr.;J. S. Reed;S. K. Verma https://doi.org/10.1111/j.1151-2916.1999.tb01990.x
  14. J. Am. Ceram. Soc. v.79 no.8 Formation and Control of Agglomerates in Alumina Powder M. Kitayama;J. A. Pask https://doi.org/10.1111/j.1151-2916.1996.tb08930.x
  15. J. Kor. Ceram. Soc. v.38 no.3 Influence of Granules Chracteristics and Compaction pressure on the Microstructure and Mechanical Properties of Sintered Alumina Y. I. Cho;S. G. Chung;S. Y. Cho;S. J. Kim;N. Shinohara;M. Okumiya
  16. J. Mater. Sci. v.28 Effect of Processing Conditions on the Characteristics of Pores in Hot Isostatically Pressed Alumina K. Uematsu;M. Sekiguchi;J. Y. Kim;K. Saito;Y. Mutoh;M. Inoue;Y. Fujino https://doi.org/10.1007/BF00595746
  17. J. Am. Ceram. Soc. v.66 no.6 Processing Related Fracture Origins: II, Agglomerate Motion and Cracklike Internal Surfaces Caused by Differential Sintering F. F. Lange;M. Metcalf https://doi.org/10.1111/j.1151-2916.1983.tb10069.x