References
- Heisel, U., and Gringel, M., 'Machine Tool Design Requirements for High-speed Machining,' Annals of the CIRP, Vol. 45, pp. 389-392, 1996 https://doi.org/10.1016/S0007-8506(07)63087-X
- Smith, S., and Tlusty, J., 'Current Trends in High-speed Machining,' J. Manuf. Sci. and Engg B, Vol. 119, No. 4, pp. 664-666, 1997 https://doi.org/10.1115/1.2836806
-
CIRP STC <
> Working Party on 3DU, 'A Proposal for Defining and Specifying the Dimensional Uncertainty of Multi-axis Measuring Machines,' Annals of the CIRP, Vol. 27, pp. 623-630 1978 - Bryan, J., 'International Status of Thermal Error Research (1990),' Annals of the CIRP, Vol. 39, pp. 645-656, 1990 https://doi.org/10.1016/S0007-8506(07)63001-7
- ISO 230-2:1997, Test code for machine tools - Part 3: Evaluation of thermal effects
- Weck, M., McKeown, P., et al., 'Reduction and Compensation of Thermal Errors in Machine Tools,' Annals of the CIRP, Vol. 44, pp. 589-598, 1995 https://doi.org/10.1016/S0007-8506(07)60506-X
- Liu, Z.Q., and Venuvinod, P.K., 'Error Compensation in CNC Turning Solely from Dimensional Measurements of Previously Machined Parts,' Annals of the CIRP, Vol. 48, pp. 429-432, 1999 https://doi.org/10.1016/S0007-8506(07)63219-3
- Chen, J.S., Yuan, J.X., Ni, J. and Wu, S.M., 'Real-time Compensation for Time-variant Volumetric Errors on a Machining Center,' Trans. ASME:J. Engineering for Industry, Vol. 115, pp. 472-479, 1993 https://doi.org/10.1115/1.2901792
- 양승한, 이철수, '5 축 CNC 공작기계의 오차합성모델링 및 보정 알고리즘,' 한국 정밀공학회지, 제 16권, 제 8호, pp. 122-129, 1999
- 황석현, 이진현, 양승한, 'CNC 공작기계에서 열변형 오차보정 시스템의 고장진단 및 복구,' 한국 정밀공학회지, 제 17권, 제 4호, pp. 135-141, 2000
- Bryan, J.B., 'The Abbe Principle Revisited: An Updated Interpretation,' Prec. Engg, Vol. 1, pp. 129-132, 1979 https://doi.org/10.1016/0141-6359(79)90037-0
- Breyer, K.H. and Pressel, H.G., 'Paving the Way to Thermally Stable Coordinate Measuring Machines,' In: Seyfried, P., Kunzmann, H., McKeown, P. and Weck, M.(eds.), Progress in Prec. Engg, Springer-Verlag, Berlin, pp. 56-75, 1991
- Wasson, K.L., Slocum, A.H. and Lienhard, J.H., Straightness Errors of Rectangular Beams Caused by Ambient Air Temperature Gradients, MIT Industrial Liaison Program Report No.10-40-93, Dept. of Mechanical Engineering, MIT, Cambridge, MA, 1993
- Schellekens, P., Soons, J. et al., Development of Methods for the Numerical Error Correction of Machine Tools, Report No. EUR 15377 EN, Eindhoven University of Technology, Brussels, Luxembourg, 1993
- Allen, D.H., and Haisler, W.E., Introduction to Aerospace Structural Analysis, John Wiley, New York, NY, 1985