참고문헌
- Dake, L. S., Russell, J. A., and Debrodt, D.C., 'A Review of DOE ECT Tribology Surveys,' J. Tribol. -T. ASME, Vol. 108, pp. 497-501, 1986 https://doi.org/10.1115/1.3261252
- Komvopoulos, K., 'Surface Engineering and Microtribology for Microelectromechanical Systems,' Wear, Vol. 200, pp. 305-327, 1996 https://doi.org/10.1016/S0043-1648(96)07328-0
- Maboudian, R., 'Surface Processes in MEMS Technology,' Surf. Sci. Rep., Vol. 30, pp. 207-269, 1998 https://doi.org/10.1016/S0167-5729(97)00014-9
- Bhushan, B., 'Nanoscale Tribophysics and Tribomechanics,' Wear, Vol. 225, pp. 465-492, 1999 https://doi.org/10.1016/S0043-1648(99)00018-6
- Kaneko, R., Miyamoto, T., Ando, Y., and Hamada, E., 'Microwear,' Thin Solid Films, Vol. 273, pp. 105-111, 1996 https://doi.org/10.1016/0040-6090(95)06801-5
- Robbins, M. O., Smith, E. D., 'Connecting Molecular-scale and Macroscopic Tribology,' Langmuir, Vol. 12, pp. 4543-4547, 1996 https://doi.org/10.1021/la9505576
- Hwang, D. H., Sung, I. H., Kim, D. E., and Lee, S. J., 'Effects of Material Pair Properties on the Frictional Behavior of Metals,' Wear, Vol. 225, pp. 600-614, 1999 https://doi.org/10.1016/S0043-1648(98)00383-4
- Oktay, S. T., Suh, N. P., 'Wear Debris Formation and Agglomeration,' J. Tribol.-T. ASME, Vol. 114, pp. 379-393, 1992 https://doi.org/10.1115/1.2920897
- Capella, B., Dietler, G., 'Force-distance Curves by Atomic Force Microscopy,' Surf. Sci. Rep., Vol. 34, pp. 1-104, 1999 https://doi.org/10.1016/S0167-5729(99)00003-5
- Johnson, K. L., 'Mechanics of Adhesion,' Tribol. Int., Vol. 31, No. 8, pp. 413-418, 1998 https://doi.org/10.1016/S0301-679X(98)00060-7
- Ikawa, N., Shimada, S., Tanaka, H., and Ohmori, G., 'Atomistic Analysis of Nanometric Chip Removal as Affected by Tool-Work Interaction in Diamond Turning,' Ann. CIRP, Vol. 40, pp. 551-554, 1991 https://doi.org/10.1016/S0007-8506(07)62051-4
- Maekawa, K., 'Friction and Tool Wear in Nano-scale Machining- A Molecular Dynamics Approach,' Wear, Vol. 188, pp. 115-122, 1995 https://doi.org/10.1016/0043-1648(95)06633-0
- Zhang, L., Tanaka, H., 'Towards a Deeper Understanding of Friction and Wear on the Atomic Scale: A Molecular Dynamics Analysis,' Wear, Vol. 211, pp. 44-53, 1997 https://doi.org/10.1016/S0043-1648(97)00073-2
- Kim, D. E., Suh, N. P., 'Molecular Dynamics Investigation of Two-Dimensional Atomic-Scale Friction,' J. Tribol.-T. ASME, Vol. 116, pp. 225-231, 1994 https://doi.org/10.1115/1.2927200
- 정구현, 이성창, 김대은, '분자정역학 기법을 이용한 초미세 절삭특성에 관한 고찰,' 한국정밀공학회지, 제 14 권, 제 3호, pp. 122-129, 1997
- Sundararajan, S., Bhushan, B., 'Topography-induced Contributions to Frictional Forces Measured Using an Atomic Force Microscope,' J. Appl. Phys., Vol. 88, No. 8, pp. 4825-4831, 2000 https://doi.org/10.1063/1.1310187
- Muller, T., Lohrmann, M., Kasser, T., Marti, O., Mlynek, J., and Krausch, G., 'Frictional Force between an Sharp Asperity and a Surface Step,' Phys. Rev. Lett., Vol. 79, No. 25, pp. 5066-5069, 1997 https://doi.org/10.1103/PhysRevLett.79.5066
- Guntherodt, H. J., 'Friction force microscopy,' in Forces in Scanning Probe Methods, pp. 285-306, Kluwer Academic Publishers, 1995
- Sung, I. H., Lee, H. S., and Kim, D. E., 'Effect of Surface Topography on the Frictional Behavior at Micro/Nano-scale,' 3rd International Colloquium Micro-Tribology, Poland, 2001, (Wear, Submitted)
- Tian, H., Suh, N. P., and Saka, N., 'Boundary Lubrication Studies on Undulated Titanium Surfaces,' Tribol. T., Vol. 32, pp. 289-296, 1989 https://doi.org/10.1080/10402008908981891
- Kim, D. E., Suh, N. P., 'Decoupled Design of Cylinder Liner for IC Engines,' SAE Paper, No.911231, pp. 99-106, 1992
- Suh, N. P., Saka, N., 'Surface Engineering,' Ann. CIRP, Vol. 36, pp. 403-408, 1987 https://doi.org/10.1016/S0007-8506(07)62632-8
- Hwang, D. H., Kim, D. E., and Lee, S. J., 'Influence of Wear Particle Interaction in the Sliding Interface on Friction of Metals,' Wear, Vol. 225, pp. 427-439, 1999 https://doi.org/10.1016/S0043-1648(98)00371-8
- Cha, K. H., Chung, K. H., and Kim, D. E., 'Effect of Slider Load on the Wear Debris Contamination Tendency of Head/Slider,' IEEE T. Magn., Vol. 35, No. 5, pp. 2355-2357, 1999 https://doi.org/10.1109/20.800823
- Cha, K. H., Kim, D. E., 'Tribological Properties of Micro-Undulated Silicon Under Light Load,' International Tribology Conference, Nagasaki, Japan, pp. 296, 2000
- Deng, K., Collins, R. J., Mehregany, M., and Sukenik, C. N., 'Performance Impact of Monolayer Coating of Polysilicon Micromotors,' J. Electochem. Soc., Vol. 142, pp. 1278-1285, 1995 https://doi.org/10.1149/1.2044164
- Cha, K. H., Kim, D. E., 'Investigation of the Tribological Behavior of Octadecyltrichlorosilane Deposited on Silicon,' Wear, Vol. 251, pp. 1169-1176, 2001 https://doi.org/10.1016/S0043-1648(01)00729-3
- Srinivasan, U., Houston, M. R., and Howe, R. T., 'Alkyltrichlorosilane-Based Self-Assembled Monolayer Films for Stiction Reduction in Silicon Micro-Machines', J. Microelectromech. S., Vol. 7, pp. 252-260, 1998 https://doi.org/10.1109/84.679393
- Archard, J. F., 'Contact and Rubbing of Flat Surfaces,' J. Appl. Phys., Vol. 24, pp. 981-988, 1953 https://doi.org/10.1063/1.1721448
- Rabinowicz, E., Friction and Wear of Materials, John Wiley & Sons, 1995
- Wienss, A., Persch-Schuy, G., Vogelgesang, M., and Hartmann, U., 'Scratching Resistance of Diamond-Like Carbon Coatings in the Subnanometer Regime,' Appl. Phys. Lett., Vol. 75, No. 8, pp. 1077-1079, 1999 https://doi.org/10.1063/1.124602
- Bhushan, B., Koinkar, V. N., 'Nanoindentation Hardness Measurements Using Atomic Force Microscopy,' Appl. Phys. Lett., Vol. 64, No. 13, pp. 1653-1655, 1994 https://doi.org/10.1063/1.111949
- Chung, K. H., Han, D. K., Park, J. W., Lee, S. C., and Kim, D. E., 'Feasible Method for Accelerated Testing of Head-Disk Interface Tribological Behavior,' J. Inf. Stor. Proc. Syst., Vol. 3, pp. 17-26, 2001
- Knurshudov, A., Kato, K., 'Wear of the Atomic Force Microscope Tip under Light Load, Studied by Atomic Force Microscopy,' Ultramicroscopy, Vol. 60, pp. 11-16, 1995 https://doi.org/10.1016/0304-3991(95)00071-8
- Kim, D. E., Yi, J. J., 'Micro-patterning of Silicon by Frictional Interaction and Chemical Reaction,' J. Tribol.-T. ASME, Vol. 120, No. 2, pp. 353-357, 1998 https://doi.org/10.1115/1.2834434
- Lee, J. M., Jin, W. H., and Kim, D. E., 'Application of Single Asperity Abrasion Process for Surface Micro-machining,' Wear, Vol. 251, pp. 1133-1143, 2001 https://doi.org/10.1016/S0043-1648(01)00756-6
- Lee, J. M., Sung, I. H., and Kim, D. E., 'Process Development of Precision Surface Micro-machining Using Mechanical Abrasion and Chemical Etching,' Microsyst. Technol., 2002, In press https://doi.org/10.1007/s00542-002-0193-7
- Wendel, M., Kuhn, S., Lorenz, H., Kottahaus, J. P., and Holland, M., 'Nanolithography with an Atomic Force Microscope for Integrated Fabrication of Quantum Electronic Devices,' Appl. Phys. Lett., Vol. 65, No. 14, pp. 1775-1777, 1994 https://doi.org/10.1063/1.112914
- Sung, I. H., Lee, H. S., and Kim, D. E., 'Influence of Surface Properties on Micro/Nano-Scale Tribological Behavior of Silicon,' Proceedings of the 32nd ISR(International Symposium on Robotics), Seoul, Korea, pp. 1921-1925, 2001
- Kim, D. E., Park, J. W., Han, D. K., Park, Y. S., Chung, K. H., and Park, N. Y., 'Strategies for Improvement of Tribological Characteristics at the Head/Disk Interface,' IEEE T. Magn., Vol. 37, No. 2, pp. 912-917, 2001 https://doi.org/10.1109/20.917641