International Journal of Precision Engineering and Manufacturing

  • 제3권1호
  • /
  • Pages.76-82
  • /
  • 2002
  • /
  • 2234-7593(pISSN)
  • /
  • 2005-4602(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

Tool Material Dependence of Hard Turning on The Surface Quality

  • Park, Young-Woo (Department of Mechatronics Engineering, Chungnam National University)
  • 발행 : 2002.01.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents an experimental study of the effect of cutting tool materials on surface quality when turning hardened steels. Machining tests on a lathe are performed using polycrystalline cubic boron nitride (PCBN) and ceramic tools at various cutting conditions without coolant. From the experiments, it is observed that the radial force is the largest force component regardless the type of tool used. The specific cutting energy for the hard turning is estimated to be considerably smaller than the specific grinding energy. It is also found that cutting force and surface roughness with the PCBN tools are higher and better than those with the ceramic tools under the same cutting condition. It is due that the PCBN tools transfer the generated heat more effectively than the ceramic tools due to their higher thermal conductivity. The optimal cutting conditions for the best surface quality are selected by using an orthogonal array concept.

키워드

참고문헌

  1. Hasan, R., Why are you still grinding?, Manufacturing Engineering, pp. 76 - 80, February 1998
  2. Naik, S., Guo, C., Malkin, S., Viens, D. V., Pater, C. M., and Reder, S. G., 'Experimental investigation of hard turning,' Proceeding of 2$2^{nd}$ International Machining and Grinding Conference, Dearborn, MI, U.S.A., pp. 523 - 539, May 1997
  3. T$\ddot o$nshoff, H. K., Wobker, H., and Brandt, D., 'Hard Turning - Influences on the Workpiece Properties,' Transactions of NAMRI/SME, Vol. XXIII, pp. 215 - 220, 1995
  4. Konig, W., Klinger, M., and Link, R., 'Machining Hard Materials with Geometrically Defined Cutting Edges - Field of Applications and Limitations,' Annals of the CIRP, Vol. 39, pp. 61 - 64, 1990 https://doi.org/10.1016/S0007-8506(07)61003-8
  5. Sista, P. S., Swain, S. O., Chandrasekar, S., and Farris, T. N., 'Tool Wear Characteristics of CBN Tools in the Finish Machining of Tool Steels,' Med- Vol. 6-2, Manufacturing Science and Technology, Vol.2,ASME,pp. 161-168, 1997
  6. Chou, Y. K., and Evans, C. J., 'Process Effects on White Layer Formation in Hard Turning.' Transactions of NAMRI/SME, Vol. XXVI, pp. 117 - 122. 1998
  7. Friedman, M. Y., and Lenz, E., 'Investigation of the Tool-Chip Contact Length in Metal Cutting,' International Journal of Machine Tool Design and Research, 10, pp. 401 - 416, 1971 https://doi.org/10.1016/0020-7357(70)90001-6
  8. Boothroyd., G., and Knight, W. A., Fundamentals of Machining and Machine Tools, Marcel Dekker, Inc., NewYork. NY, 1989
  9. Phadke, M. S., Quality Engineering Using Robust Design, Prentice-Hall, Englewood Cliffs, NJ, 1989
  10. Belavendram, N., Quality by Design, Prentice-Hall, Englewood Cliffs, NJ, 1995
  11. Balaji, A. K., Sreeram, G., Jawahir, I. S., and Lenz, E., 'The Effects of Cutting Tool Thermal Conductivity on Tool-Chip Contact Length and Cyclic Chip Pormation in Machining with Grooved Tool,' Annals of the CIRP, Vol. 48/1, pp. 33 - 38, 1999 https://doi.org/10.1016/S0007-8506(07)63126-6
  12. Vyas, A., and Shaw, M. C., 'Mechanics of Saw-Tooth Chip Formation in Metal Cutting,' Journal of Manufacturing Science and Engineering, Vol. 121, pp. 163- 172, 1999 https://doi.org/10.1115/1.2831200