초록
본 연구는 강한 반복하중하에서 강부재가 파괴에 이르는 손상과정을 규명하고, 손상과 관련된 인자들을 이용하여 손상지수를 제시하며, 이와 관련된 해석 기법을 개발하는 것을 목적으로 한다. 제안된 손상평가 방법은 변형이 가장 심하게 집중된 단면에 있어서 국소 변형율의 이력에 초점을 맞추어 유도되었다. 해석모델은 좌굴변형의 발생 방향을 가정한 켄틸레버형 강상자형 부재이다. 파괴에 이르는 중심 압축하중과 일정 압축하중이 가해진 상태에서 반복 제어변위가 작용하는 강부재에 대해 비선형해석을 실시하였다. 본 해석에 적용된 주요 변수는 하중 재하패턴, 강종이다. 각 변수가 파괴모드, 변형능력, 그리고 손상과정에 미치는 영향을 기술하였고, 각각 강종에 따른 파괴 과정을 비교하였다. 그 결과 강한 반복하중하에서의 강부재의 파괴는 국부좌굴에 의해서 결정되고 특히 파괴와 직접적으로 연관성이 있는 국소 소성변형율과 관련되어 있음을 알 수 있었다.
This paper aimed to investigate the damage process of steel parts experiencing failure under strong repeated loading. Likewise, a damage index using various factors related to the damage was proposed. An analysis method for evaluating the damage state was also developed. The damage assessment method focused on the local strain history at the cross-section of the heaviest concentration of deformation. Cantilever-type steel parts were analyzed under uniaxial load combined with a constant axial load, considering horizontal displacement history, Loading patterns and steel types were considered as the main parameters in analyzing the models. The effects of the parameters on the failure modes, deformation capacity, and damage process as seen from the analysis results were also discussed. Each failure process was compared as steel types. In addition, the failure of steel parts under strong repeated loading was determined according to loading. Results revealed that the state of the failure is closely related to the local plastic strain.