Journal of Welding and Joining

The Korean Welding and Joining Society (대한용접접합학회)
권호 표지

A Study on Solderability of Sn-Ag-Cu Solder with Plated Layers in ʼn-BGA

ʼn-BGA에서 Sn-Ag-Cu 솔더의 도금층에 따른 솔더링성 연구

  • Published : 2002.12.01
⟨ Previous Next ⟩

Abstract

Sn-Ag-Cu solder is known as most competitive in many kinds of Pb-free solders. In this study, effects of solderability with plated layers such as Cu, Cu/Sn, Cu/Ni and Cu/Ni/Au were investigated. Sn-3.5Ag-0.7Cu solder balls were reflowed in commercial reflow machine (peak temp. : 250℃ and conveyer speed : 0.6m/min). In wetting test, immersion speed was 5mm/sec., immersion time 5sec., immersion depth 4mm and temperature of solder bath was 250℃. Wettability of Sn-3.5Ag-0.7Cu on Cu, Cu/Sn (5㎛), Cu/Ni (5㎛), and Cu/Ni/Au (5㎛/500Å) layers was investigated. Cu/Ni/Au layer had the best wettability as zero cross time and equilibrium force, and the measured values were 0.93 sec and 7mN, respectively. Surface tension of Sn-3.5Ag-0.7Cu solder turmed out to be 0.52N/m. The thickness of IMC is reduced in the order of Cu, Cu/Sn, Cu/Mi and Cu/Ni/Au coated layer. Shear strength of Cu/Ni, Cu/Sn and Cu was around 560gf but Cu/Ni/Au was 370gf.

Keywords

References

  1. 전자자료사 ʼn-BGA 월간반도체
  2. MS thesis A Study on the Soldering Characteristics with Reflow Variables in BGA Hyun Joo Han
  3. 전자자료사 CSP의 기초와 실장기술 (1) 월간반도체
  4. エレクトロニクス 實裝 における 環境問題シンポシウム
  5. IEEE v.22-4 Manufacturing of Cu/electroless Nickel/Sn-Pb flip chip solder bumps Lin Kwang-Lung;Liu Yi-Cheng
  6. PhD thesis Study on the Analysis of Wetting Forces on the Wetting Balance Curve and Application to the Prediction of Solder Joint Geometry Jae Yong Park
  7. Journal of Electronic Materials v.22 no.7 the dependence of the activation energies of intermetallic formation on the composition of composite Sn/Pb solders Y. Wu;J.A. Sees;C. Pouraghabager https://doi.org/10.1007/BF02817353
  8. Components and Packaging Technologues IEEE v.23-2 Solder Metallization Interdiffusion in Microelectronic Interconnects A. Zribi(et. al)
  9. American Society for Metals v.965 Binary Alloy Phase Diagram Thaddeus B. Massalski
  10. Electronic Components and Technology Conference Interfacial Reactions between Lead-Free SnAgCu Solder and Ni(P)/Au Surface Finish on PWBs K. Zeng(et. al)
  11. IEEE Electronic Components and Technology Conference Microstructure Joint Strength and Failure Mechanism of Sn-Ag, Sn-Ag-Cu versus Sn-Pb-Ag Solders in BGA Package Ka Yau LEE;Ming Li;Dennis R.OLSEN;William T. CHEN
  12. 한국 마이크로 전자 및 패키징 학회 추계 기술 심포지움 Sn계 무연솔더에 관한 연구 이창배;정승부;서창제