DOI QR코드

DOI QR Code

Development and validation of a non-linear k-ε model for flow over a full-scale building

  • Wright, N.G. (School of Civil Engineering, The University of Nottingham) ;
  • Easom, G.J. (School of Civil Engineering, The University of Nottingham) ;
  • Hoxey, R.J. (Environment Group, Silsoe Research Institute)
  • 발행 : 2001.06.25

초록

At present the most popular turbulence models used for engineering solutions to flow problems are the $k-{\varepsilon}$ and Reynolds stress models. The shortcoming of these models based on the isotropic eddy viscosity concept and Reynolds averaging in flow fields of the type found in the field of Wind Engineering are well documented. In view of these shortcomings this paper presents the implementation of a non-linear model and its evaluation for flow around a building. Tests were undertaken using the classical bluff body shape, a surface mounted cube, with orientations both normal and skewed at $45^{\circ}$ to the incident wind. Full-scale investigations have been undertaken at the Silsoe Research Institute with a 6 m surface mounted cube and a fetch of roughness height equal to 0.01 m. All tests were originally undertaken for a number of turbulence models including the standard, RNG and MMK $k-{\varepsilon}$ models and the differential stress model. The sensitivity of the CFD results to a number of solver parameters was tested. The accuracy of the turbulence model used was deduced by comparison to the full-scale predicted roof and wake recirculation zone lengths. Mean values of the predicted pressure coefficients were used to further validate the turbulence models. Preliminary comparisons have also been made with available published experimental and large eddy simulation data. Initial investigations suggested that a suitable turbulence model should be able to model the anisotropy of turbulent flow such as the Reynolds stress model whilst maintaining the ease of use and computational stability of the two equations models. Therefore development work concentrated on non-linear quadratic and cubic expansions of the Boussinesq eddy viscosity assumption. Comparisons of these with models based on an isotropic assumption are presented along with comparisons with measured data.

키워드

참고문헌

  1. Baetke, F and Werner, H. (1990), "Numerical simulation of turbulent flow over surface mounted obstcles with sharp edges and corners", J. Wind Eng. Ind. Aerod., 35, 129-147, Elsevier, Amsterdam, Netherlands. https://doi.org/10.1016/0167-6105(90)90213-V
  2. Basora, B. and Younis, B.A. (1992), "Progress in the prediction of turbulent wind loading on buildings", J. Wind Eng. Ind. Aerod., 41-44, 2863-2874, Elsevier, Amsterdam, Netherlands.
  3. Boussinesq, T.V. (1877), Mem. Pre. Acad. Sci., 3rd Edn., Paris XXIII, 46.
  4. Bradshaw, P. (1973), "Effects of streamline curvature on turbulent flow", AGARDograph no. 169.
  5. Bradshaw, P. (1992), "Turbulence: the chief outstanding difficulty of our subject", 5th Symp. on Numer. & Phys. Aspects of Aerod. Fl., January 1992, California State Univ., USA.
  6. Craft, T.J. and Launder, B.E. (1972), "New wall reflection model applied to the turbulent impinging jet ", AIAA J., 30, 2970.
  7. Craft, T.J., Launder, B.E. and Suga, K. (1993), "Development and application of a cubic eddy-viscosity model of turbulence", Int. J. Heat Fluid Fl., 17: 108-115, 1996, Elsevier Science Inc., New York, USA.
  8. Easom, G.J. (1997), "Improved computational models for wind engineering", Internal Report No. FR97 016, School of Civil Engineering, The University of Nottingham, UK, (http://www.nottingham.ac.uk/-evzngw/download.htm).
  9. Gaskell, P.H. and Lau, A.K.C. (1988), "Curvature compensated convective transport : SMART, a new boundness preserving transport algorithm", Int. J. Numer. Meth. Eng., 8, 617-641. https://doi.org/10.1002/fld.1650080602
  10. Hoxey, R., Short, L. and Richards, P. (1999), "Quasi-steady theory developed with experimental verification", Proc. of the 10th ICWE, Copenhagen 1999, 3, 1679-1692.
  11. Kim, J., Kline, S.J. and Johnston, J.P. (1980), "Investigation of a reattaching turbulent flow over a backward facing step", Transactions of the ASME, 102, September 1980.
  12. Launder, B.E and Spalding, D.B. (1974), "The numerical computation of turbulent flows", Comput. Methods. Appl. Mech. Eng., 3, 269-289. https://doi.org/10.1016/0045-7825(74)90029-2
  13. Launder, B.E., Reece, G.J. and Rodi, W. (1975), "Progress in the development of a Reynolds Stress turbulence closure", J. Fluid Mech., 68, Pt 3, 537-566. https://doi.org/10.1017/S0022112075001814
  14. Leschziner, M.A. (1995), "Modelling turbulence in physically complex flows", Industrial Hydraulics and Multiphase flows - Hydro 2000, Thomas Telford, London, England.
  15. Lumley, J. (1970), "Towards a turbulent constitutive relation", J. Fluid Mech., 41, 413. https://doi.org/10.1017/S0022112070000678
  16. Menter, F. and Grotjans, H. (1999), "Application of advanced turbulence models to complex industrial flows", Internal Report, CFX International.
  17. Murakami, S. (1993), "Comparison of various turbulence models applied to a bluff body", J. Wind Eng. Ind. Aerod., 46 & 47, 21-36, Elsevier, Amsterdam, Netherlands.
  18. Murakami, S. (1997), "Overview of turbulence models applied in CWE", Institute of Ind. Science., Univ. Tokyo, Japan.
  19. Murakami, S., Mochida, A. and Ooka, R. (1993), "Numerical simulation of flow fields over a surface-mounted cube with various second-moment closure models", Ninth Symp. on Turbulent Shear Flows, Kyoto, Japan.
  20. Ng, K.H. (1971), "Predictions of turbulent boundary-layer developments using a two-equation model of turbulence", Ph.D Thesis, University of London, UK.
  21. Orzag, S.A (1994), Lecture notes of ICASE/LaRC short course on Turbulence Modeling & Prediction, March 1994 in Gatski T.B, Hussaini M.Y & Lumley J.L 1996, "Simulation and Modeling of Turbulent Flows", Oxford University Press, Oxford, England.
  22. Pope, S.B. (1975), "A more general effective-viscosity hypothesis", J. Fluid Mech., 72, pt. 2, 331-340. https://doi.org/10.1017/S0022112075003382
  23. Richards, P.J. and Hoxey, R.P. (1993), "Appropriate boundary conditions for computational wind engineering models using the $k-{\varepsilon}$ turbulence model ", J. Wind Eng. Ind. Aerod., 46-47, 145-153. https://doi.org/10.1016/0167-6105(93)90124-7
  24. Rodi, W. (1972), "The prediction of free turbulent boundary layers by use of a two equation model of turbulence", Ph.D. Thesis, University of London, UK.
  25. Smagorinsky, J.S. (1963), "General circulation experiments with primitive equations, Part 1; basic experiments", Mon. Weather Rev., 91, 99-164. https://doi.org/10.1175/1520-0493(1963)091<0099:GCEWTP>2.3.CO;2
  26. Spalding, D.B. (1972), "A novel finite difference formulation for differential expressions involving both the first and second derivatives", Int. J. Numer. Meth. Eng., 4, 551. https://doi.org/10.1002/nme.1620040409
  27. Speziale, C.G. (1987), "On non-linear k-l and $k-{\varepsilon}$ models of turbulence", J. Fluid Mech., 178, 459-475. https://doi.org/10.1017/S0022112087001319
  28. Speziale, C.G. and Ngo, T. (1988), "Numerical solution of turbulent flow past a backward facing step using a nonlinear $k-{\varepsilon}$ model", Int. J. Eng. Sci., 26(10), 1099-1112. https://doi.org/10.1016/0020-7225(88)90068-7
  29. Suga, K. (1996), "Development and application of a non-linear eddy viscosity model sensitized to stress and strain invariants", Ph.D. Thesis, Department of Mechanical Engineering, UMIST TDF/95/11.
  30. Tsuchiya, M., Murakami. S., Mochida., A., Kondo, K. and Ishida, Y. (1996), "Development of a New $k-{\varesilon}$ Model for flow & pressure fields around a bluff body", CWE96, Second Int. Symp. on CWE, Colorado State University, USA.
  31. Wilcox, D.C. (1994), "Turbulence modeling for CFD", DCW Industries Inc., Canada.
  32. Wright, N.G. and Easom, G.J. (1999), "Comparison of several computational turbulence models with full-scale measurements of flow around a building", Wind and Structures, An Int. J. 2(4).
  33. Yakhot, V., Orsag, S.A.,Thamgam, S., Gatski, T.B. and Speziale, C.G. (1992), "Development of turbulence models for shear flows by a double expansion technique", Phys. Fluids A, 4, 1510-1520. https://doi.org/10.1063/1.858424

피인용 문헌

  1. Application of computational fluid dynamics in building performance simulation for the outdoor environment: an overview vol.4, pp.2, 2011, https://doi.org/10.1080/19401493.2010.513740
  2. 50 years of Computational Wind Engineering: Past, present and future vol.129, 2014, https://doi.org/10.1016/j.jweia.2014.03.008
  3. Analysis and Characterization of Hurricane Winds vol.139, pp.3, 2013, https://doi.org/10.1061/(ASCE)EM.1943-7889.0000520
  4. CFD simulations of the wind environment around an airport terminal building vol.21, pp.4, 2006, https://doi.org/10.1016/j.envsoft.2004.08.011
  5. Prediction of wind environment and thermal comfort at pedestrian level in urban area vol.96, pp.10-11, 2008, https://doi.org/10.1016/j.jweia.2008.02.033
  6. LES over RANS in building simulation for outdoor and indoor applications: A foregone conclusion? vol.11, pp.5, 2018, https://doi.org/10.1007/s12273-018-0459-3
  7. The CFD Technology Based Hospital Landscape Design Study Illustrated by the Case of Liaodong Bay Hospital of China Medical University vol.584, pp.None, 2001, https://doi.org/10.4028/www.scientific.net/amm.584-586.605