DOI QR코드

DOI QR Code

Characteristics of wind loads on roof cladding and fixings

  • Ginger, J.D. (Cyclone Structural Testing Station (CSTS), School of Engineering, James Cook University)
  • 발행 : 2001.02.25

초록

Analysis of pressures measured on the roof of the full-scale Texas Tech building and a 1/50 scale model of a typical house showed that the pressure fluctuations on cladding fastener and cladding-truss connection tributary areas have similar characteristics. The probability density functions of pressure fluctuations on these areas are negatively skewed from Gaussian, with pressure peak factors less than -5.5. The fluctuating pressure energy is mostly contained at full-scale frequencies of up to about 0.6 Hz. Pressure coefficients, $C_p$ and local pressure factors, $K_l$ given in the Australian wind load standard AS1170.2 are generally satisfactory, except for some small cladding fastener tributary areas near the edges.

키워드

참고문헌

  1. Australian Standard (1989), SAA Loading Code Part 2 Wind Loads AS1170.2 1989.
  2. Ginger, J.D. and Letchford, C.W. (1993), "Characteristics of large pressures in regions of flow separation", Jour. Wind Engineering and Industrial Aerodynamics, 49, 301-310. https://doi.org/10.1016/0167-6105(93)90025-J
  3. Ginger, J.D. and Letchford, C.W. (1999), "Net pressures on a low-rise full scale building", Jour. Wind Engineering and Industrial Aerodynamics, 83, 239-250. https://doi.org/10.1016/S0167-6105(99)00075-6
  4. Ginger, J.D., Reardon, G.F. and Whitbread, B.J. (1998), "Wind loads on a typical low-rise house", Cyclone Structural Testing Station, James Cook University Technical Report No. 46.
  5. Jancauskas, E.D., Walker, G.R. and Mahendran, M. (1989), "Fatigue characteristics of wind loads on roof cladding", Proc. 2nd Asia Pacific Symposium on Wind Engineering, Beijing, China.
  6. Levitan, M.L. and Mehta, K.C. (1992), "Texas tech field experiments for wind loads Part I: Building and pressure measurement system, Part II: Meteorological instrumentation and terrain parameters", Jour. Wind Engineering and Industrial Aerodynamics, 43, 1565-1588. https://doi.org/10.1016/0167-6105(92)90372-H
  7. Reardon, G.F., Henderson, D.J. and Ginger, J.D. (1999), "A structural assessment of the effects of cyclone Vance on houses in Exmouth WA", Cyclone Structural Testing Station, James Cook University, Technical Report No. 48.
  8. Technical Record 440 (1983), "Guidelines for the testing and evaluation of products for cyclone-prone areas (TR 440)", Experimental Building Station, Department of Hosing and Construction.
  9. Walker, G.R. (1975), "Report on cyclone Tracy - effect on buildings - December 1974", Department of Housing and Construction. 1.
  10. Xu, Y.L. (1993), "Wind induced fatigue loading on roof cladding of low-rise buildings", Cyclone Structural Testing Station, James Cook University, Technical Report No. 41. J

피인용 문헌

  1. Full-scale testing of low-rise, residential buildings with realistic wind loads vol.104-106, 2012, https://doi.org/10.1016/j.jweia.2012.01.004
  2. New test and design methods for steel roof battens subject to fatigue pull-through failures vol.119, 2017, https://doi.org/10.1016/j.tws.2017.07.007
  3. The Florida Coastal Monitoring Program (FCMP): A review vol.99, pp.9, 2011, https://doi.org/10.1016/j.jweia.2011.07.002
  4. Unified static-fatigue pull-through capacity equations for cold-formed steel roof battens vol.139, 2017, https://doi.org/10.1016/j.jcsr.2017.09.027
  5. Wind Effect on Vibration and Scattering Behavior of Japanese Roofing Tile vol.1, 2012, https://doi.org/10.1016/j.ieri.2012.06.010
  6. Simulated tropical cyclonic winds for low cycle fatigue loading of steel roofing vol.12, pp.4, 2001, https://doi.org/10.12989/was.2009.12.4.383
  7. Fragility Comprehensive Assessment of Low-Rise Cold-Formed Steel Framed Wall Structure Subjected to Wind Load vol.2021, pp.None, 2021, https://doi.org/10.1155/2021/6969967