Structural Engineering and Mechanics

  • 제12권6호
  • /
  • Pages.595-614
  • /
  • 2001
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Analytical and experimental postbuckling of conditioned cables

  • Rivierre, L. (France Telecom) ;
  • Polit, O. (LMpX-Universite Paris X-1 Chemin) ;
  • Billoet, J.L. (LM2S-UPRES A8007-ENSAM)
  • 발행 : 2001.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

This paper studies the behaviour of a homogeneous cable in a horizontal rigid duct and loaded by an axial compressive force. This behaviour is characterized by spatial buckling modes, named sinusoidal and helical, due to friction and total or partial cable locking. The evaluation of critical buckling loads involved by drilling technology has been studied by many authors. This work presents a new formulation, taking the friction effects into account, for the transmission of the axial load during the postbuckling process. New analytical expressions of pitches in both buckling cases are also given. A life-sized bench is presented, which permits to study the laying of optical fiber cables by squeezing them into an underground duct. Finally, analytical solutions are compared with experimental tests and finite element simulations.

키워드

참고문헌

  1. Bogy, D., and Paslay, P. (1964), "Buckling of drill pipe in an inclined hole", J. Eng. for Industry, 86(2).
  2. Boulharts-Campion, H. (1998), "Experimental and numerical studies of the pushing installation of composite cable in a duct", PhD thesis, E.N.S.A.M Paris (in French).
  3. Cheatham, J., and Patillo, P. (1984), "Helical postbuckling configuration of weightless column under the action of an axial load", Soc. of Petrol. Eng. J., 467-472.
  4. Chen, U., Lin, Y., and Cheatham, J. (1990), "Tubing and casing in horizontal wells", J. Petrol. Tech.
  5. Chen, Y. (1988), "Post buckling behavior of a circular rod constrained within an inclined hole", Master's thesis, Rice University.
  6. Dawson, R., and Paslay, P. (1984), "Drillpipe buckling in inclined holes", J. Petrol. Tech., 1734 -1738.
  7. Dillinger, T., Gravley, W., and Walraven, J. (1983), "Preventing buckling in drill strength", US patent N 4,384,483.
  8. Hibbitt, Karlson, and Sorensen (1999), ABAQUS Version 5.8 : Theory Manual.
  9. Lubinski, A. (1987), "Developments in petroleum engineering", Gulf Publishing Company, 1, 213-214.
  10. Lubinski, A., Althouse, W., and Logan, J. (1962), "Helical buckling of tubing sealed in packers", J. Petrol. Tech., 655-670.
  11. Mignon, P., Pécot, A., Campion, J., and Cam, J.L. (1998), "An impressive life size friction coefficient measurement technique", Proc. of Euro Cable'98.
  12. Miska, S., and Cunha, J. (1995), "Helical buckling of long weightless strings subjected to axial and torsionnal loads", Drilling Technology, ASME, 65, 75-78.
  13. Mitchell, R. (1986), "Simple frictional analysis of helical buckling of tubing", SPE Drilling Engineering, 457-465.
  14. Rivierre, L. (2000), "Beam buckling related to rigid wall and contacts: Analytical, experimental and numerical approaches", PhD thesis, E.N.S.A.M Paris, French.
  15. Rivierre, L., Billoët, J.-L., and Polit, O. (1999), "Effect of conditioning boundaries on the postbuckling behavior", Proc. of the ASEM'99, 1, 493-498.
  16. Sadiq, T. and Juvkam-Wold, H. (1995), "Lateral contact force in horizontal wells: An experimental study", Spring Drilling Conference.
  17. Salies, J., Azar, J., and Jr., J.S. (1994), "Experimental and mathematical modelling of helical buckling in directionnal wellbores", presented at the Petrol. Conf. & Exhibition of Mexico, 79-89.
  18. Salies, J., Azar, J., and Jr., J.S. (1995), "Experimental and mathematical modeling of helical buckling of pipes in horizontal wellbores", Drilling Technology, ASME, 65, 79-89.
  19. Suryanarayana, P., and McCann, R. (1994), "Experimental study of buckling and post-buckling of literally constrained rods: Part 1 - frictionnal sffects", Energy-Sources Technology Conference & Exhibition, 1-12.
  20. Wu, J. (1992), "Buckling behavior of pipes in directional and horizontal wells", PhD thesis, Texas A&M.
  21. Wu, J. (1995), "Slack-off load transmission in horizontal and inclined wells", Production Operation Symposium, 489-494.
  22. Wu, J., and Juvkam-Wold, H. (1993), "Helical buckling of pipes in extended reach and horizontal wells - part 2: Frictional drag analysis", J. of Energy Resources Technology, 115, 196-201. https://doi.org/10.1115/1.2905993
  23. Wu, J., and Juvkam-Wold, H.C. (1995), "Buckling and lockup of tubulars in inclined wellbores", Transaction of the ASME, 117, 208-213.

피인용 문헌

  1. Finite element linear and nonlinear, static and dynamic analysis of structural elements, an addendum vol.19, pp.5, 2002, https://doi.org/10.1108/02644400210435843