Structural Engineering and Mechanics

  • 제12권5호
  • /
  • Pages.507-526
  • /
  • 2001
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

On the local stability condition in the planar beam finite element

  • Planinc, Igor (Faculty of Civil and Geodetic Engineering, University of Ljubljana) ;
  • Saje, Miran (Faculty of Civil and Geodetic Engineering, University of Ljubljana) ;
  • Cas, Bojan (Faculty of Civil and Geodetic Engineering, University of Ljubljana)
  • 발행 : 2001.11.25
⟨ 이전 논문 다음 논문 ⟩

초록

In standard finite element algorithms, the local stability conditions are not accounted for in the formulation of the tangent stiffness matrix. As a result, the loss of the local stability is not adequately related to the onset of the global instability. The phenomenon typically arises with material-type localizations, such as shear bands and plastic hinges. This paper addresses the problem in the context of the planar, finite-strain, rate-independent, materially non-linear beam theory, although the proposed technology is in principle not limited to beam structures. A weak formulation of Reissner's finite-strain beam theory is first presented, where the pseudocurvature of the deformed axis is the only unknown function. We further derive the local stability conditions for the large deformation case, and suggest various possible combinations of the interpolation and numerical integration schemes that trigger the simultaneous loss of the local and global instabilities of a statically determined beam. For practical applications, we advice on a procedure that uses a special numerical integration rule, where interpolation nodes and integration points are equal in number, but not in locations, except for the point of the local instability, where the interpolation node and the integration point coalesce. Provided that the point of instability is an end-point of the beam-a condition often met in engineering practice-the procedure simplifies substantially; one of such algorithms uses the combination of the Lagrangian interpolation and Lobatto's integration. The present paper uses the Galerkin finite element discretization, but a conceptually similar technology could be extended to other discretization methods.

키워드

참고문헌

  1. Antman, S.S., and Rosenfeld, G. (1978), "Global behavior of buckled states of non-linearly elastic rods", SIAM Review, 20, 513-566. https://doi.org/10.1137/1020069
  2. Banovec, J. (1986), "Geometric and material nonlinear analysis of planar frames", Ph. D. Thesis (in Slovenian), University of Ljubljana, Slovenia.
  3. Belytschko, T., Fish, J., and Engelmann, B.E. (1988), "A finite element with embedded localization zone", Comput. Meth. in Appl. Mech. and Eng., 70, 59-89. https://doi.org/10.1016/0045-7825(88)90180-6
  4. Belytschko, T., and Fish, J. (1989), "Embedded hinge lines for plate elements", Comput. Meth. in Appl. Mech. and Eng., 76, 67-86. https://doi.org/10.1016/0045-7825(89)90141-2
  5. Bergan, P.G. (1984), "Some aspects of interpolation and integration in nonlinear finite element analysis of reinforced concrete structures", Computer Aided Analysis and Design of Concrete Structures, Part 1, Damjanic' , F. et al., eds., Pineridge Press, Swansea, 301-316.
  6. Cichon' , C. (1984), "Large displacements in-plane analysis of elastic-plastic frames", Comput. and Struct., 19, 737-745. https://doi.org/10.1016/0045-7949(84)90173-1
  7. Cowper, G.R. (1966), "The shear coefficient in Timoshenko's beam theory", ASME J. Appl. Mech., 33, 335-340. https://doi.org/10.1115/1.3625046
  8. Crisfield, M.A. (1991, 1997), Non-linear Finite Element Analysis of Solids and Structures, Volumes 1 and 2, John Wiley Sons, Chichester.
  9. de Borst, R., Sluys, L.J., Mühlhaus, H.-B., and Pamin, P. (1993), "Fundamental issues in finite element analysis of localization of deformation", Eng. Comput., 10, 99-121. https://doi.org/10.1108/eb023897
  10. Fujii, F., and Okazawa, S. (1997), "Bypass, homotopy path and local iteration to compute the stability point", Struct. Eng. and Mech., 5, 577-586. https://doi.org/10.12989/sem.1997.5.5.577
  11. Hohn, F.E. (1973), Elementary Matrix Algebra, 3rd edn., The Macmillan Company, New York.
  12. Hsiao, K.M., Hou, F.Y., and Spiliopoulos, K.V. (1988), "Large displacement analysis of elasto-plastic frames", Comput. Meth. in Appl. Mech. and Eng., 28, 627-633.
  13. Hughes, T.J., and Pister, K.S. (1978), "Consistent linearization in mechanics of solids and structures", Comput. and Struct., 8, 391-397. https://doi.org/10.1016/0045-7949(78)90183-9
  14. Jelenic, G., and Saje, M. (1995), "A kinematically exact space finite strain beam model-Finite element formulation by generalized virtual work principle", Comput. Meth. in Appl. Mech. and Eng., 120, 131-161. https://doi.org/10.1016/0045-7825(94)00056-S
  15. Ortiz, M., Leroy, Y., and Needleman, A. (1987), "A finite element method for localized failure analysis", Comput. Meth. in Appl. Mech. and Eng., 61, 189-214. https://doi.org/10.1016/0045-7825(87)90004-1
  16. Planinc, I. (1998), "A quadratically convergent algorithms for the computation of stability points: the application of the determinant of the tangent stiffness matrix", Ph.D. Thesis (in Slovenian), University of Ljubljana, Slovenia.
  17. Planinc, I., and Saje, M. (1998), "A quadratically convergent algorithm for the computation of stability points: the application of the determinant of the tangent stiffness matrix", Comput. Meth. in Appl. Mech. and Eng., 169, 89-105.
  18. Reissner, E. (1972), "On one-dimensional finite-strain beam theory: the plane problem", J. Appl. Math. and Physics (ZAMP), 23, 795-804. https://doi.org/10.1007/BF01602645
  19. Reese, S., and Wriggers, P. (1997), "Material instabilities of an incompressible elastic cube under triaxial tension", Int. J. Solids and Struct., 34, 3433-3454. https://doi.org/10.1016/S0020-7683(96)00205-3
  20. Saje, M., Planinc, I., Turk, G., and Vratanar, B. (1997), "A kinematically exact finite element formulation of planar elastic-plastic frames", Comput. Meth. in Appl. Mech. and Eng., 144, 125-151. https://doi.org/10.1016/S0045-7825(96)01172-3
  21. Ting, T.C.T. (1996), "Positive definiteness of anisotropic elastic constants", Mathematics and Mechanics of Solids, 1, 301-314. https://doi.org/10.1177/108128659600100302
  22. Washizu, K. (1981), Variational Methods in Elasticity and Plasticity, Pergamon Press, Oxford.
  23. Waszczyszyn, Z., Cichon , C., and Radwanska, M. (1994), Stability of Structures by Finite Element Methods, Elsevier Science B. V., Amsterdam.
  24. Wriggers, P., and Simo, J.C. (1990), "A general procedure for the direct computation of turning and bifurcation points", Int. J. Numer. Meth. in Eng., 30, 155-176. https://doi.org/10.1002/nme.1620300110
  25. Wriggers, P., Wagner, W., and Miehe, C. (1988), "A quadratically convergent procedure for the calculation of stability points in finite element analysis", Comput. Meth. in Appl. Mech. and Eng., 70, 329-347. https://doi.org/10.1016/0045-7825(88)90024-2

피인용 문헌

  1. Geometrically and materially non-linear analysis of planar composite structures with an interlayer slip vol.114-115, 2013, https://doi.org/10.1016/j.compstruc.2012.09.012
  2. Non-linear analysis of two-layer beams with interlayer slip and uplift 2011, https://doi.org/10.1016/j.compstruc.2011.06.007
  3. The strain-based beam finite elements in multibody dynamics vol.305, pp.1-2, 2007, https://doi.org/10.1016/j.jsv.2007.03.055
  4. Finite element linear and nonlinear, static and dynamic analysis of structural elements, an addendum vol.19, pp.5, 2002, https://doi.org/10.1108/02644400210435843
  5. Finite-element formulation of geometrically exact three-dimensional beam theories based on interpolation of strain measures vol.192, pp.49-50, 2003, https://doi.org/10.1016/j.cma.2003.07.008
  6. Buckling of layered wood columns vol.38, pp.8-9, 2007, https://doi.org/10.1016/j.advengsoft.2006.08.021
  7. Strain-based geometrically nonlinear beam formulation for modeling very flexible aircraft vol.48, pp.16-17, 2011, https://doi.org/10.1016/j.ijsolstr.2011.04.012
  8. Non-linear analysis of two-layer timber beams considering interlayer slip and uplift vol.32, pp.6, 2010, https://doi.org/10.1016/j.engstruct.2010.02.009
  9. Non-linear finite element analysis of composite planar frames with an interlayer slip vol.82, pp.23-26, 2004, https://doi.org/10.1016/j.compstruc.2004.03.070
  10. Rotational invariants in finite element formulation of three-dimensional beam theories vol.82, pp.23-26, 2004, https://doi.org/10.1016/j.compstruc.2004.03.069
  11. The three-dimensional beam theory: Finite element formulation based on curvature vol.81, pp.18-19, 2003, https://doi.org/10.1016/S0045-7949(03)00208-6
  12. Numerical modelling of behaviour of reinforced concrete columns in fire and comparison with Eurocode 2 vol.42, pp.21-22, 2005, https://doi.org/10.1016/j.ijsolstr.2005.03.015
  13. Finite element dynamic analysis of geometrically exact planar beams vol.85, pp.17-18, 2007, https://doi.org/10.1016/j.compstruc.2006.08.081
  14. Non-linear fire analysis of restrained curved RC beams vol.84, 2015, https://doi.org/10.1016/j.engstruct.2014.11.012
  15. The effects of different strain contributions on the response of RC beams in fire vol.29, pp.3, 2007, https://doi.org/10.1016/j.engstruct.2006.05.008
  16. Non-linear fire-resistance analysis of reinforced concrete beams vol.16, pp.6, 2003, https://doi.org/10.12989/sem.2003.16.6.695
  17. Fire analysis of steel–concrete composite beam with interlayer slip vol.89, pp.1-2, 2011, https://doi.org/10.1016/j.compstruc.2010.09.004
  18. Non-linear analysis of side-plated RC beams considering longitudinal and transversal interlayer slips vol.16, pp.6, 2014, https://doi.org/10.12989/scs.2014.16.6.559
  19. On materially and geometrically non-linear analysis of reinforced concrete planar frames vol.41, pp.24-25, 2004, https://doi.org/10.1016/j.ijsolstr.2004.06.004
  20. Semi-analytical buckling analysis of reinforced concrete columns exposed to fire vol.71, 2015, https://doi.org/10.1016/j.firesaf.2014.11.018
  21. Fire analysis of steel frames with the use of artificial neural networks vol.63, pp.10, 2007, https://doi.org/10.1016/j.jcsr.2007.01.013
  22. Locking-free two-layer Timoshenko beam element with interlayer slip vol.43, pp.9, 2007, https://doi.org/10.1016/j.finel.2007.03.002
  23. Fire analysis of timber composite beams with interlayer slip vol.44, pp.5, 2009, https://doi.org/10.1016/j.firesaf.2009.03.007