Structural Engineering and Mechanics

  • 제12권3호
  • /
  • Pages.283-295
  • /
  • 2001
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Explicit incremental matrices for the postbuckling analysis of thin plates with small initial curvature

  • Jayachandran, S. Arul (Structural Engineering Research Centre, CSIR Campus) ;
  • Gopalakrishnan, S. (Indian Institute of Science) ;
  • Narayanan, R. (Structural Engineering Research Centre, CSIR Campus)
  • 발행 : 2001.09.25
⟨ 이전 논문 다음 논문 ⟩

초록

The postbuckling behaviour of thin plates is an important phenomenon in the design of thin plated structures. In reality plates possess small imperfections and the behaviour of such imperfect plates is of great interest. To numerically study the postbuckling behaviour of imperfect plates explicit incremental or secant matrices have been presented in this paper. These matrices can be used in combination with any thin plate element. The secant matrices are shown to be very accurate in tracing the postbuckling behaviour of thin plates.

키워드

참고문헌

  1. Allman, D.J. (1982), "Improved finite element models for the large displacement bending and post buckling analysis of thin plates", Int. J. Solids and Structures, 18(9), 737-762. https://doi.org/10.1016/0020-7683(82)90032-4
  2. Ashwini Kumar (1987), "Postbuckling analysis of orthotropic rectangular plates under uniaxial compression", Proc. of the Seminar on Aero Structures (NASAS-89), Bangalore, India, 191-204.
  3. Bilin Chang and Shabana A.A. (1990), "Total Lagrangian formulation for the large displacement analysis of rectangular plates", Int. J. Numer. Meth. Eng., 24, 73-103.
  4. Bogner, F.K., Fox, R.L., and Schmidt, L.A. (1966), "The generation of inter-element compatible matrices by the use of interpolation formulas", Proc. of the Conference on Matrix methods in Structural Mechanics, TR 66-80, Air Force Flight Dynamics Lab., Wright-Patterson Airforce Base, Ohio.
  5. Bradfield, C.D. (1982), "An evaluation of the elastic-plastic analysis of steel plates loaded by uniaxial in-plane compression", Int. J. Mech. Sci., 24(3), 127-146. https://doi.org/10.1016/0020-7403(82)90033-9
  6. Bradfield, D. Christopher and Richard W.P. Stoner (1984), "Simple collapse analysis of plates compression", J. Struct. Eng., ASCE, 110(12), 2976-2993. https://doi.org/10.1061/(ASCE)0733-9445(1984)110:12(2976)
  7. Chang, B., and Sherboune (1990), "Nonlinear finite element formulation for the large displacement analysis of plates", J. Appl. Mech., 57, 707-718. https://doi.org/10.1115/1.2897081
  8. Crisfield, M.A (1980), "The automatic nonlinear analysis of stiffened plates and shells using finite elements", Proc. Inst. of Civil Engrs., London, Part.2,69, 891-909.
  9. Dawson, R.G., and Walker, A.C. (1973), "Postbuckling of geometrically imperfect plates", J. Struct. Div., ASCE, 93(ST-1), 75-94.
  10. Dow, R.S., and Smith, C.S. (1984), "Effects of localised imperfection on compressive strength of long rectangular plate", J. Constr. Steel Res., 4, 51-76. https://doi.org/10.1016/0143-974X(84)90035-X
  11. Ganapathi, M., and Varadhan, T.K. (1995), "Nonlinear free flexural vibrations of laminated circular cylindrical shells", Composite Structures, 30, 33-49. https://doi.org/10.1016/0263-8223(94)00025-5
  12. Harris, J. ap. C., and Little, G.H. (1991), "Aspects of the behaviour of rectangular steel plates under uniaxial compression", The Structural Engineer, 69(14), 255-261.
  13. Jeom Kee Palk (1995), "A new concept of the effective shear modulus for a plate buckled in shear", J. Ship Research, 39(1), 70-75.
  14. Kapania, Rakesh K, and Yang, T.Y. (1987), "Buckling, post-buckling and nonlinear vibrations of imperfect plates", AIAA J., 25(10), 1338-1346. https://doi.org/10.2514/3.9788
  15. Mallet, R.H., and Marcal, P.V. (1968), "Finite element analysis of nonlinear structures", J. Struct. Div., ASCE, 94(ST9), 2081-2105.
  16. Murray, D.W., and Wilson E.L. (1969), "Finite element postbuckling analysis of thin elastic plates", AIAA J., 7, 1915-1920. https://doi.org/10.2514/3.5481
  17. Nara, S., and Fukumoto, Y. (1988), "Ultimate strength of Steel plates under bending and compression", Stalbau, 57, 179-185.
  18. Narayanan, G., and Krishnamoorthy, C.S. (1989), "A simplified formulation for a plate/shell element for geometrically nonlinear analysis of moderately large deflections with small rotations", Finite Elements in Analysis and Design, 4, 333-350. https://doi.org/10.1016/0168-874X(89)90027-9
  19. Osama, K. Bedair (1994), "On the post-buckling of plates under stress gradient", Struct. Eng. and Mech., 4(4), 397-413.
  20. Pica, A., and Wood, R.D. (1980), "Postbuckling behaviour of plates and shells using a Mindlin shallow shell formulation", Comput. and Struct., 12, 759-768. https://doi.org/10.1016/0045-7949(80)90178-9
  21. Rajasekaran Sundaramoorthy and David, W. Murray (1973), "Incremental finite element matrices", J. Struct. Div., ASCE, 99(ST12), 2423-2438.
  22. Rerkshanandana, N., Usami, T., and Karasudhi, P. (1981), "Ultimate strength of eccentrically loaded steel plates and box sections", Comput. and Struct., 13(4), 467-481. https://doi.org/10.1016/0045-7949(81)90041-9
  23. Rhodes, J. (1981), "On the approximate prediction of elasto-plastic plate behaviour", Proc. of Inst. of Civil Engrs, London, Part-2, 71, 165-183. https://doi.org/10.1680/iicep.1981.2146
  24. Rushton, K.R. (1970), "Large deflection of plates with initial curvature", Int. J. Mech. Sci., 12, 1037- 1051. https://doi.org/10.1016/0020-7403(70)90031-7
  25. Shanmugam, N.E. (1987), "Strength of axially loaded orthotropic plates", J. Struct. Eng., ASCE, 113, 3322-333.
  26. Singh, G., Rao, G.V., and Iyengar, N.G.R. (1994), "Thermal postbuckling behaviour of laminated composite plates", AIAA J.., 32, 1336-1338. https://doi.org/10.2514/3.12143
  27. Sridharan Srinivasan (1982), "A finite strip analysis of locally buckled plated structures subjected to non uniform compression", Eng. Struct., 4, 249-255. https://doi.org/10.1016/0141-0296(82)90030-X
  28. Stein, M. (1983), "Post buckling of orthotropic composite plates loaded in compression", AIAA J., 21(12), 1729-1735. https://doi.org/10.2514/3.8316
  29. Sundaresan, P., Singh, G., and Rao, G.V. (1996), "Buckling and post buckling analysis of moderately thick laminated rectangular plates", Comput. and Struct., 61(1), 79-86 https://doi.org/10.1016/0045-7949(96)00010-7
  30. Tsutomu Usami (1993), "Effective width of locally buckled plates in compression and bending", J. Struct. Eng., 119(5), 1358-1373. https://doi.org/10.1061/(ASCE)0733-9445(1993)119:5(1358)
  31. Ueda, Y., and Yao, T. (1985), "The influence of complex initial deflection modes on the behaviour and ultimate strength of rectangular plates in compression", J. Constr. Steel Res., 5, 265-302. https://doi.org/10.1016/0143-974X(85)90024-0
  32. Yamaki, N. (1959), "Postbuckling behaviour of rectangular plates with small initial curvature loaded in edge compression", J. Appl. Mech., 26, 407-414.
  33. Yang, T.Y. (1972), "Elastic snap through analysis of curved plates using discrete elements", AIAA J., 10(4), 371-372. https://doi.org/10.2514/3.50104
  34. Yang, T.Y. (1970), "Flexible plate finite element on elastic foundation", J. Struct. Eng., ASCE, 96, 2083-2101.
  35. Yang, T.Y. (1971), "A finite element procedure for large deflection analysis of plates with initial deflections", AIAA J., 9(8), 1468-1473. https://doi.org/10.2514/3.6387
  36. Yang, T.Y. (1971), "Elastic postbuckling predictions of plates using discrete elements", AIAA J., 9(9), 1665-1666. https://doi.org/10.2514/3.49971
  37. Yang, T.Y., and Han, A.B. (1983), "Buckled plate vibrations and large amplitude vibrations using high order triangular elements", AIAA J., 21(5), 758-766. https://doi.org/10.2514/3.8144

피인용 문헌

  1. Finite element linear and nonlinear, static and dynamic analysis of structural elements, an addendum vol.19, pp.5, 2002, https://doi.org/10.1108/02644400210435843