로봇의 추적오차 감소를 위한 궤적계획방법

Robot Path Planning Method for Tracking Error Reduction

  • 김동준 (한창시스템 중앙연구소) ;
  • 김갑일 (명지대 전기정보제어공학부) ;
  • 박용식 (명지대 전기정보제어공학부)
  • 발행 : 2001.03.01

초록

A lot of robot trajectory tracking methods are proposed to enhance the tracking error, but irregular tracking errors are always accompanied and very hard to reduce it. Up to now, these irregular tracking errors are reduced by introducing more complicated control algorithms. But, it is intuitively obvious to reduce only the big errors selectively in the irregular ones for the better performance instead of using more complicated control algorithms. By the characteristics of the robot, big tracking errors of the end-effector are generated mostly due to the fast moving of joint. So, in this paper, we introduce a new method which reduce the big tracking errors by clippings the joint velocity with the constraint of given path. Using this method, desired trajectory tracking is obtained within the far reduced error bound. Also, this method is successfully applied to generate the path-constrained error reducing trajectories for 2-axis SCARA type robot.

키워드

참고문헌

  1. R. Paul, 'Manipulator Cartesian Path Control,' IEEE Trans. Systems, Man, Cybernetics, vol. SMC-9, NO.11, pp.702-711, Nov.1979
  2. C. S. Lin, P.R. Chang and J.Y.S.Luh, 'Formulation and Optimization of Cubic Polynomial Joint Trajectories for Industrial Robots ', IEEE Trans, Automatic Control, Vol. AC-28, No. 12, pp. 1067-1074, Dec., 1983
  3. C.S.Lin, P.R.Chang, 'Joint Trajectories of Mechanical Manipulators for Cartesian Path Approximation,' IEEE Trans. Syst, Man, Cybern, Vol. SMC-13 NO. 6, pp.1094-1102, Nov.1983
  4. J.Y.S. LUH, 'Approximate Joint Trajectories for Control of Industrial Robots along Cartesian Paths,' IEEE Trans. Syst, Man, Cybern, Vol. SMC-14, NO.3, pp.444-450, MAY/JUNE. 1984
  5. S. E. Thompson and R. V. Patel, 'Formulation of Joint Trajectories for Industrial Robots using B-spline,' IEEE Trans, Industrial Electronics, Vol. 35, No. 5, pp. 192-199, May, 1990
  6. C. H. Wang and J. G. Horng, 'Constrained Minimum-Time Path Planning for Robots Manipulators via Virtual Knots of the Cubic B-spline Functions,', IEEE Trans, Automatic Control, Vol. 35, No. 5, pp. 573-577, May, 1990 https://doi.org/10.1109/9.53526
  7. B. K. Choi and D. W. Kim, 'Bounded Deviation Joint Path Algorithms for Piecewise Cubic Polynomial Trajectories.', IEEE Trans, Systems, Mans, and Cybern., Vol. 20, No. 3, pp. 725-733, May/June, 1990 https://doi.org/10.1109/21.57288
  8. B. Cao.G, I. Dodds,' Time Optimal and Smooth Constrained Path Planning for Robotic Manipulators,' in Proc. IEEE Int. Conf. on Robotics and Automation, May, 1994, San Diego, California, pp. 1853-1858 https://doi.org/10.1109/ROBOT.1994.351191
  9. B. Cao.G, I. Dodds and G. W. Irwin,' Implementation of Time Optimal Smooth and Collision-Free Path Planning in a Two Robot Arm Environment,' in Proc. IEEE Int. Conf. on Robotics and Automation, May, 1995, Nagoya, pp. 715-720 https://doi.org/10.1109/ROBOT.1995.525368
  10. J. Latombe, Robot Motion Planning, Kluwer Academic Publishers, 1993
  11. 손유석, 김동준, 원진희, 김갑일, 김대원, 'PC를 이용한 SCARA type Robot의 구동에 관한 연구,' 1994년 대한전기학회 하계학술대회 논문집, 1994년 7월 21-23일, 경주, pp.1058/1060