Abstract
The objective of this study was to examine the effect of oxidation inhibitor contents on the work of adhesion, fracture toughness, and impact strength of the unidirectional carbon-carbon composites (C/C composites). The molybdenum disilicide ($MoSi_2$) used as an oxidation inhibitor was impregnated with phenolic resins to improve the anti-oxidation properties of the composites in different concentrations of 4, 12 and 20 wt%. Based on Wilhelmy equation, the work of adhesion of C/C composites was calculated by contact angle methods. Fracture toughness and impact strength were pressured by three-point bending test for the critical intensity factor ($K_IC$) and Izod test method, respectively. As a result, the composites made with $MoSi_2$ resulted in an increasing of both fracture toughness and impact strength. Especially, the composites made with 12 wt% $MoSi_2$ content showed the highest value of London dispersive component, $W_A\;^L$, in work of adhesion, resulting from improving the interfacial adhesion force among fibers, filler, and matrix in this system.
본 연구에서는 일방향 탄소/탄소 복합재료에 산화억제제로 사용된 $MoSi_2$의 첨가량에 따른 복합재료의 부착력, 파괴인성 그리고 충격강도와의 관계를 고찰하였다. 산화억제제로 사용한 이규화 몰리브덴 (MoSi$_2$)은 복합재료의 내산화 특성을 향상시키기 위하여 각각 4, 12, 20wt%의 중량비로 페놀수지에 함침시켰다. 본 연구에 있어서 복합재료의 부착력은 접촉각 측정에 의한 Wilhelmy 방정식을 사용하여 계산하였다. 파괴인성과 충격강도는 임계 세기인자 측정을 위한 3점 굴곡 시험 방법과 Izod 충격시험에 의해 각각 측정하였다. 그 결과, $MoSi_2$가 첨가된 탄소/탄소 복합재료의 파괴인성과 충격강도는 증가하였다. 특허 l2wt%의 $MoSi_2$가 첨가된 복합재료가 London dispersive 요소($W_A\;^L$)의 증가에 의한 가장 큰 부착력을 나타내었으며, 이는 복합재료의 각 구성요소간의 계면결합력 증가에 따른 결과라 사료된다.