Abstract
Amino terminated PES-CTBN-PES triblock copolymer was synthesized from PES oligomer and commercial CTBN rubber (CTBN1300$\times$13), and molecular weight of the copolymer was controlled to be 15000 g/mole. The copolymer was utilized to toughen diglycidyl ether of bisphenol-A (DGEBA) epoxy resin which was cured with 4,4'-diaminodi-phenylsulfone (DDS) and subjected to the measurement of thermal properties, fracture toughness ( $K_{IC}$), flexural properties and solvent resistance. The properties were compared with those from the samples modified by CTBN/PES blends. The maximum loading of copolymer into the epoxy resin was 40 wt% without utilizing solvent, at which $K_{IC}$ fracture toughness of 2.21 MPa${\cdot}m^{0.5}$ was obtained without sacrificing flexural properties and chemical resistance. However, the epoxy resin modified with PES/CTBN blend exhibited much lower $K_{IC}$ and flexural properties compared to the epoxy resins toughened by PES-CTBN-PES copolymers.
야민 말단기를 가지는 PES(6k) 올리고머와 상용 CTBN (1300$\circ$13)으로부터 분자량이 15000g/mol인 PES-CTBN-PES 공중합체를 합성하였으며, 이를 에폭시 수지의 강인화제로 사용하였다. DDS를 경화제로 사용하였으며, 공중합체로 강인화된 에폭시 수지의 열특성, 강인성, 굴골 강도 및 내용매성을 측정하여, PES/CTBN 블렌드로 강인화된 에폭시 수지의 특성과 비교하였다. 공중합체는 용매의 사용없이 에폭시 수지에 40 wt%까지 첨가가 가능하였으며, 굴곡강도 및 내용매성의 저하 없이 40 wt%에서 2.21 mPa${\cdot}m^{0.5}$의 아주 높은 강인성을 보였다. 하지만 PES/CTBN 블렌드로 강인화된 에폭시 수지는 공중합체로 강인화된 시편보다 다소 낮은 강인성, 굴곡강도 및 내용매성을 보였다.