Resources Recycling (자원리싸이클링)
- Volume 10 Issue 3
- /
- Pages.51-59
- /
- 2001
- /
- 2765-3439(pISSN)
- /
- 2765-3447(eISSN)
Removal of Impurities from Waste Carbon Sludge for the Recycling
폐 카본슬러지의 재활용을 위한 不純物 분리 제거
Abstract
Impurities removal from waste carbon black was carried out to produce high-grade carbon black. A large amount of hydrophilic carbon black is produced as a byproduct of the hydrogen production process by flame decomposition of water. Due to its impurities content such as sulphur, iron, ash, etc., it can only be used as low-grade carbon or burnt out. High-grade hydrophilic carbon black is 3~5 times more expensive than oil-based carbon black because of high production cost associated with process complexly and pollutant treatment. Hydrophilic carbon is normally used for conductive materials for batteries, pigment for plastics, electric wire covering, additives for rubber, etc. In these applications, impurity content must be blow 1 fe. In this study, magnetic separation, froth flotation and ultrasonic treatment were employed to remove impurities from the low-grade hydrophilic carbon black. Results showed that the ash, iron and sulphur content of product decreased to less than 0.01 wt.%, 0.01 wt.% and 0.3 wt % respectively and the surface area of product was about 930
본 연구는 폐 카본 슬러지로부터 불순물을 제거하여 고품위 수성 카본을 제조하고자 수행되었다. 수성 카본 슬러지는 NH
Keywords