Friction Model of Sheet Metal Forming Considering Lubricant and Surface Roughness

윤활과 표면조도를 고려한 박판 성형 마찰 모델

  • Published : 2001.12.01

Abstract

In order to find the effect of material property and lubricant viscosity on the frictional characteristics a sheet metal friction tester was designed and tensile test, surface roughness test, and friction test were performed with several kinds of drawing oils. Test results show that as the lubricant viscosity becomes lower, the friction coefficient is higher. When surface roughness is extremely low or high, friction coefficient is also high. Using these test results, the friction model considering lubricant viscosity and surface roughness is developed. The validity and accuracy of the friction model are shown by comparing the punch loads among FEM analysis results employing current friction model and conventional friction model respectively and experimental measurement.

Keywords

References

  1. Int. J. Mech. Sci v.19 A Method for Determining the Coefficient of Friction in Punc Stretching of Sheet Metals A.K. Ghoah
  2. NUMISHEET' 96 A study on friction characteristics of coated and non-coated steel sheets in sheet forming Y. Kong;Y. Sun;X. Wang;R.H. Wagoner
  3. Journal of Material Processing Technology v.63 The Influence of Tool Geometry on Friction Behavior in Sheet Metal Forming S.S. Han
  4. 19th IDDRG Biennial Congress Study About the Nature of the Friction-Lubrication Process during the Deep Drawing of Thin Sheets M. Teodorrescu;G.Frumusanu;L. Teodorescu
  5. 한국소성가공학회지 v.1 no.1 각종 도금 강판의 신장 성형시 마찰계수측정 권재욱;김인수;이동녕
  6. Applied Ergonomics v.32 The effect of surface roughness and contaminant on the dynamic friction of porcelain tile Wen-Ruey Chang
  7. Journal of Materials Processing Technology v.63 Study of the friction characteristics of lubricants and their affecting factors during drawing Zhi Liang Zhang;Li Chen
  8. SAE paper No 84370 The Effect of Zinc Coating on the Formability of Automotive Steet Steel Meuleman, D.J.;Denner, S.G.;Cheng, F.L.
  9. Wear237 A frictional study of uncoated EBT steel sheets in abending under tension friction test A. Wihlborg;L. Gunnarsson
  10. 대한 기계학회 논문집 v.14 no.6 자동차용 표면 처리강판의 마찰 특성에 관한 연구 김영석;남재복;최원집
  11. NUMERICAL METHODS for ENGINEERS Steven C. C;Raymond P C.
  12. 한국자동차 공학회, 95년도 춘계학술대회 논문집 1권 v.1 굽힘 효과를 고려한 자동차 패널 성형공정의 2차원 유한 요소 해석 김준보;금영탁