초록
MoO$_3$의 첨가가 Mn-Zn ferrites의 투자율에 미치는 효과를 고찰하였다. 하소 후 분쇄과정에서 MoO$_3$를 각각 600 ppm, 800ppm, 1,000pp으로 첨가하였다. 소결은 135$0^{\circ}C$에서 3시간 동안 수행하였으며 냉각시 산소분압을 조절하였다. 승온속도를 분당 5$^{\circ}C$로 했을 경우 MoO$_3$를 첨가하지 않은 시편의 경우 8,000정도의 초기투자율 값을 나타내었고 MoO$_3$를 600 ppm, 800 ppm 첨가한 시편에서는 초기투자율의 값이 13,200, 13,550으로 증가하였다. 그러나 1,000 ppm 첨가한 경우에는 1,00$\mu\textrm{m}$ 이상의 과대입성장이 관찰되었으며 초기투자율 값 또한 감소하였다. 반면에 승온속도를 분당 1$0^{\circ}C$로 변화한 시편의 경우 MoO$_3$첨가량이 1,000ppm일 때 과대입성장이 관찰되지 않았고 초기투자율이 15,000 이상의 높은 값을 나타내었다.
The effect of MoO$_3$ addition on the permeability of Mn-Zn ferrites was studied. 600 ppm, 800 ppm and 1,000 ppm of MoO$_3$ were added to the main composition after calcination. Ferrite cores were sintered at 135$0^{\circ}C$ for 3hrs, followed by cooling according to the equilibrium oxygen concentration. The initial permeability was about 8,000 with heating rate 5$^{\circ}C$/min for 3hrs without MoO$_3$ addition. When 600 ppm and 800 ppm of MoO$_3$ were added, the initial permeabilities, 13,200 and 13,550 were obtained, respectively. However, the sample with 1,000 ppm MoO$_3$ showed lower permeabilities because of abnormal grain growth. At the heating rate 1$0^{\circ}C$/min, the ferrite cores with 1,000 ppm MoO$_3$ demonstrated the highest initial permeability greater than 15,000, without exaggerated grain growth.