Wear Behavior of Plasma Transferred Arc Deposited Layers for Ni - and Co - base Alloy

Ni계 및 Co계 합금 PTA 오버레이용접층의 마모거동에 관한 연구

  • 윤병현 (포항산업과학연구원 설비/용접연구팀) ;
  • 이창희 (한양대학교 재료공학부) ;
  • 김형준 (포항산업과학연구원 설비/용접연구팀)
  • Published : 2001.10.01

Abstract

This study has evaluated the wear behavior of PTA (Plasma Transferred Arc) Inconel 625 and Stellite 6 overlays on Nimonic 80A substrate. Nimonic 80A alloy was also included for comparison. In order to evaluate the wear performance, three-body abrasive wear test and pin-on-disk dry sliding wear test were performed. Microstructural development during the solidification of deposits is also discussed. Wear test results show that the wear rate of Stellite 6 deposit is lower than that of Inconel 625 deposit and Nimonic 80A. The sliding wear resistance of overlay deposits follows a similar trend to the abrasive wear resistance, but for Nimonic 80A. The main wear mechanisms were abrasive wear for Inconel 625 deposit, adhesive wear and delamination for Stellite 6 deposit in pin-on-disk dry sliding wear test and ploughing in three-body abrasive wear test. Cross sectional examinations of the worn surface of pin specimens after pin-on-disk dry sliding wear test implies that the plastic deformation near worn surface has occurred during the wear testing.

Keywords

References

  1. Advances in PTA Durfacing. Thermal Spray Coating: Properties, Processes and Applications E. Lugscheider;U. Morkramer;A. Ait Mekideche
  2. New Applications for High Power PTA Surfacing in the Steel Industry: International Advances in Coatings Technology H. Hallen;A. Ait-Mekidenche;F. Hettiger;H. Mathesius;U. Morkramer;E. Lugscheider
  3. 대한용접학회지 v.12 no.4 플라즈마분체 오버레이법에 의한 알루미늄합금표면의 경화특성에 관한 연구(Ⅰ) 강원석;이영호;田福久;中田一博
  4. 대한용접학회지 v.12 no.4 플라즈마분체 오버레이법에 의한 알루미늄합금표면의 경화특성에 관한 연구(Ⅱ) 강원석;이영호;田福久;中田一博
  5. 대한용접학회지 v.15 no.5 PTAW법에 의한 Al합금표면의 후면 경화층 형성에 관한 연구 임병수;김봉수;오세훈;황선효;서창제
  6. 대한용접학회지 v.15 no.5 PTAW법에 의한 Al 합금표면의 Si 합금층의 형성과 내마모성 개선 박성두;이영호;田福久;中田一博
  7. Materials Science and Technolgy v.10 no.11 Nimonic Compound Exhaust Valve Spindles for Diesel Engines via Hot Isostatic Pressing T. Moriyama;Y. Izaki;K. Umeda;R. Oka;Y. Nishioka;T. Tanaka
  8. Materials Science and Technolgy v.10 no.11 Coatings ad Hardfacing Alloys for Corrosion and Wear Resistance in Diesel Engines J.R. Nicholls
  9. Wear v.201 The Effect of Operating Conditions on Heavy Duty Engine Valve Seat Wear Y.S. Wang;S. Narasimhan;J.M. Larson;J.E. Larson;G.C. Barber
  10. 대한금속학회지 v.36 no.9 Co계 Stellite 합금 대체용Fe계, Ni계 경면재료의 Cavitation Erosion 거동 김준기;안삼열;김용덕;오한근;이덕현;김선진
  11. 대한금속학회지 v.34 no.12 Fe-25 at.% Al 금속간화합물의 마식거동 김용석;송진화
  12. 대한금속학회지 v.31 no.10 연성재질의 마식거동에 미치는 기계적 성질의 영향(Ⅰ) 김용석;성진화;장영원
  13. 대한금속학회지 v.31 no.10 연성재질의 마식거동에 미치는 기계적 성질의 영향(Ⅱ) 김용석;성진화;장영원
  14. ASTM Standard G65-85 Standard Practice for Conducting Dry Sand/Rubber Wheel Abrasion Test
  15. ASTM Standard G99-95a v.16 Test Method for Wear Testing with a Pin-on-disk Apparatus
  16. Metall, Mater. Trans. A. v.29A no.11 Solidification of Nb-bearing Superalloys: Part Ⅰ.Reaction Sequences J.N. Dupont;C.V. Robino;J.R. Micheal;M.R. Notis;A.R. Marder
  17. Acta Mater. v.46 no.13 Modeling Solute Redistribution nad Micristructural Development in Fusion Welds of Nb-bearing Superalloys J.N. Dupont;C.V. Robino;A.R. Marder
  18. Wear Mater. v.2 Development of New Co-base Hardfacing Alloys H. Berns;A. Fisher;W. Theisen
  19. J. of Materials Processing Technology v.105 Two-and Three-body Abrasive Wear Behavior of Different Heat Treated Boron Alloyed High Chromium Cast Iron Grinding Balls M. Izciler;H. Celik
  20. Wear v.174 no.1;2 A Model for the Abrasive Wear Resistance of Multiphase Materials N. Axen;S. Jacobson