한국재료학회지 (Korean Journal of Materials Research)

  • 제11권12호
  • /
  • Pages.1063-1067
  • /
  • 2001
  • /
  • 1225-0562(pISSN)
  • /
  • 2287-7258(eISSN)
한국재료학회 (Materials Research Society of Korea)
권호 표지

SCM 435 강의 플라즈마 질화처리시 펄스 인자의 영향

Influence of Pulse Parameters on the Plasma Nitriding of SCM435 Steels

  • 송동원 (동의대학교 신소재공학과) ;
  • 이인섭 (동의대학교 신소재공학과)
  • Song, Dong-Won (Depatment of Advanced Materials Engineering, Dongeui University) ;
  • Lee, In-Seop (Department of Advanced Materials Engineering, Dongeui University)
  • 발행 : 2001.12.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The effect of the pulse parameters(pulse ratio and frequency) on the characteristics of the nitrided layer in the pulsed plasma nitrified SCM435 Steels was investigated. Material properties of the nitrided layer were analysed by employing optical microscope, scanning electron microscope(SEM), X-ray diffractometer(XRD) and micro-Vickers hardness tester. It was found that both the compound layer thickness and the surface hardness decreased with decreasing of pulse ratios. At high pulse ratio, the compound layer thickness and the surface hardness were rapidly decreased with decreasing frequency compared to lower pulse ratios.

키워드

참고문헌

  1. Steffen Hoppe, Surf. Coat. Tech., 98, 1199 (1998) https://doi.org/10.1016/S0257-8972(97)00548-3
  2. B. Podgornik, V. Vizintin, V. Leskovsk, Surf. Coat. Tech., 108-109, 454 (1998) https://doi.org/10.1016/S0257-8972(98)00571-4
  3. K.-T. Rie, Surf. Coat. Tech., 112, 56 (1999) https://doi.org/10.1016/S0257-8972(98)00747-6
  4. C. Alves Jr., J.A. Rodrigues, A. E. Martinelli, Surf. Coat. Tech., 122, 112 (1999) https://doi.org/10.1016/S0257-8972(99)00326-6
  5. K.-T. Rie;E. Broszeit, Surf. Coat. Tech., 76-77, 425 (1995) https://doi.org/10.1016/0257-8972(95)02513-8
  6. K.-H. Bae, 'PLASMA/ION Nitirding Heat Teatment', p.15, Dan-Gun, Kor. (1996)
  7. G.-H. Jeong, B.-Y Jeong and M.-H. Kim, J. Kor. Inst. Met. and Mater., 37(2), 220 (1999)
  8. G.-J. Jeong, B.-Y Jeong and M.-H. Kim, J. Kor. Inst. Met. and Mater., 37, 482 (1999)
  9. G. Henrion, R. Hugon, M. Fabry, V. Scherentz, Surf. Coat. Tech., 97, 729 (1997) https://doi.org/10.1016/S0257-8972(97)00320-4
  10. J. Bougdira, G. Henrion, M. Fabry, M. Remy and J.R. Gussenot, Mater. Sci. Eng., A139, 15 (1991) https://doi.org/10.1016/0921-5093(91)90587-D