초록
60ZnO-20B$_2$O$_3$-10SiO$_2$-10PbO의 조성을 가진 결정성 봉착용 유리분말과 ZrB$_2$분말을 출발물질로 사용하여 Na분위기 하에서 소결한 복합소결체를 저항체 후막으로써 사용가능성을 검토하였다. 도전성입자 ZrB$_2$는 소결중 매우 민감한 산화특성을 나타내었으며, 이것은 로내 또는 시편내에 잔류된 미량의 산소 및 유리성분 중 B$_2$O$_3$의 반응에 의한 배위수 변화과정에서 유리되는 산소가 원인으로 될 수 있다는 것을 시편의 밀도 및 부피변화 등을 통해 확인되었다. 각 혼합물의 소결온도와 혼합비 변화에 따라 내부조직의 변화와 함께 10~$10^{5}{\Omega}/cm^2$정도의 제어 가능한 저항값을 얻을 수 있었다. 이러한 결과들로부터 유리기지 중에서 ZrB$_2$입자들의 치밀화 경향을 갖는 복합소성시편들에 대한 거시적인 관점에서 도전성경로형성 및 도전기구를 설명하였다.
Devitrifiable solder glass/$ZrB_2$ sintered composites were prepared by using glass with the composition of $60ZnO-20B_2O_3-10SiO_2-10PbO$(in wt%) and $ZrB_2$, powder as starting materials under the $N_2$atmosphere. $ZrB_2$which the good conduction materials showed sensitive oxidation characteristics, because some parts of the $ZrB_2$in specimens changed into the insulated phase of $ZrO_2$. These Phenomena would be estimated that it caused a few amount of residual oxygen in the furnace and/or specimens and the coordination number change of $B_2O_3$ in the glass. The sintering temperature and the mixed ratios of each phase were control of large ranged the resistivity ranged from 10 to 10$^{3}{\Omega}/cm^2$ orders, and to make a conductible microstructure. From these results, it would be explained that the conduction path of $ZrB_2$particles built up within sintered glass matrix.