참고문헌
- Abbett, M., 1971, 'Mach Disk in Underexpanded Exhaust Plumes,' AIAA Journal, Vol. 9, No.3, pp. 512-514
- Arnold, A., Bombach, R. and Kappe1i, B., 2000, 'Fuel-oil concentration in a gas turbine burner measured with laser-induced fluorescence,' Experiments in Fluids 29, 468
-
Basner, R., Schmidt, M., Becker, K., Tarnovsky, V. and Deutsch, H., 2000, 'Absolute Total and Partial Cross-Sections for the Electron Impact Ionization of
$TiCl_4$ ,' Thin Solid Films, Vol. 374, pp. 292-297 https://doi.org/10.1016/S0040-6090(00)01143-3 - Cho, J. H., Han, S. H., Lee, Y. H., Kim, O. K., Kim, G. H., Kim, Y. W., Lim, H. E. and M. J. S, 2001, 'The Measurement of Nitrogen Ion Species Ratio in Inductively Coupled Plasma Source Ion Implantation,' Surface and Coatings Technology, Vol. 136, pp. 106-110 https://doi.org/10.1016/S0257-8972(00)01037-9
- Case, M. E., Hofeldt, D. L., 1996, 'Soot Mass Concentration Measurements in Diesel Engine Exhaust Using Laser-Induced Incandescence,' Aerosol Science and Technology 25, 46
- Crist, S., Sherman, P. M., and Glass, D. R., 'Study of the Highly Underexpanded Sonic Jet,' AIAA Journal, Vol. 4, No.1, pp. 68-71
- Eggins, P. L., and Jackson, D. A., 1974, 'Laser Doppler Velocity Measurements in an Under-Expanded Free Jet,' Journal of Physics D: Applied Physics, Vol. 7, No. 14, pp. 1894-1906 https://doi.org/10.1088/0022-3727/7/14/308
- Erlich, J., Tsao, J. Y, 1989, Laser Microfabrication, in Thin Film Processes and Lithography (Academic, Boston), p. 587
- Estler, R. C., Norgar, N. S., Muenchausen, R. E., Wu, X. D., Foltyn, S. and Garcia, A. R., 1991, Rev. Sci. Instrum. 62, 437
- Gilligan, J., Bourham, M., Hankins, O., Auciello, O., Tallavarjula, S., and Mohanti, R., 1991, 'Studies to Reduce Material Erosion in Electrothermal Launchers,' IEEE Trans. Magnetics, Vol. 27, No. 1, pp. 476-481 https://doi.org/10.1109/20.101079
- Hankins, O. E., Bourham, M. and Mann, D., 1997, 'Observations of Visible Light Emission from Interactions between an Electrothermal Plasma and a Propellant,' IEEE Trans. Mag. 33, No. 1, pp. 295-298 https://doi.org/10.1109/20.559972
- Hankins, O., Bourham, M., Earnhart, J. and Gilligan, J., 1993, 'Visible light emission from a dense electrothermal launcher plasma,' IEEE Trans. Mag. 29, IJ58
- Hopkins, J. B., Langridge-Smith, P. R. R., Morse, M. D. and Smally, R. E., 1983, J. chem. Phys. 78, 1627
- Klingenberg, G. and Heimerl, J. M., 1992, 'Gun Muzzle Blast and Flash' Chap. 6. Progress in Astronautics and Aeronautics, Vol. 139 https://doi.org/10.1002/prep.19890140204
- Kohel, J. M., Su, L. K., Clemens, N. T., and Varghese, P. L., 'Emission Spectroscopic Measurements and Analysis of a Pulsed Plasma Jet,' IEEE Trans. Magnetics, Vol. 35, No. 1, pp. 201-206 https://doi.org/10.1109/20.738404
- Liepmann, H. W., and Roshko, A., 1957, Elements of Gas Dynamics, 1st ed., Wiley, New York
- Lyman, J. L., 1988, SPIE 1033, 446
- Macek, M., Navinsek, B., Panjan, P. and Kadlec, S., 2001, 'A Study of Plasma Parameters in a BAI 730 M Triode Ion Plating System by Means of a Langmuir Probe and Plasma Mass and Energy Spectroscopy,' Surface and Coatings Technology, Vol. 135, pp. 208-220 https://doi.org/10.1016/S0257-8972(00)00998-1
- Mcenally, C. S., Pfefferle, L. D., 1998, 'Species and Soot Concentration Measurements in a Methane/ Air Nonpremixed Flame Doped With C4 Hydrocarbons,' Combustion and Flame, 115, 81 https://doi.org/10.1016/S0010-2180(97)00348-9
- Mulser, P., Sigel, R. and Witkowski, S., 1973, Phys. Rep. 6, 187
- Okuji, S., Sakudo, N., Hayashi, K., Okada, M., Onogawa, T., Maesaka, T., Nishiyama, Y., Komatsu, K., Toyoda, K., Yashima, S., Ishida, T. and Awazu, K., 'Spatial Distributions of lon-Species in a Large-Volume Inductively Coupled Plasma Source,' Surface and Coatings Technology, Vol. 136, pp. 102-105 https://doi.org/10.1016/S0257-8972(00)01036-7
- Rohlfing, E. A., Cox, D. M. and Kaldor, A., 1984, J. Chem. Phys. 81, 3322
- Zhao, F. Q., Kadota, T. and Takemoto, T., 1992, 'Mixture Strength Measurements in the Combustion Chamber of SI Engine via Raleigh Scattering (Concentration Fluctuation in a Motored Engine,' JSME international journal. Series II, Fluids 35, 616