참고문헌
- ASM, Cemented Carbides, Metals Handbook, Vol. 2, 10th Edition, pp. 950-977
- Brooks, K. J. A., 1992, 'World Directory and Handbook of Hardmetals and Hard Materials,' 5th edition, pp. 85 - 89, International Carbide Data
- Charmilles Technologies Co., 1998, Operaring manual
- Cornelissen, H., Snoeys, R. and Kruth, J. P., 1977, 'Investigation on the Optimal Machining Conditions for Electro-Discharge Machining of Cemented Carbides,' 5th North American Metalworking Research Conference (NAMRC5), pp. 258-263
- Dauw, D. F. and Albert, L., 1992, 'Two Decades of Wire-EDM Evolution: A Significant Improvement of Overall Performance,' Proc. of the 10th Inter. Symp. Electromachining (ISEM10), pp. 300-319
- Dunnebacke, George, 1992, 'High Performance Electrical Discharge Machining Using WaterBased Dielectic,' Proc. of the 10th Inter. Symp. For Electromachining (ISEM - X), pp. 161-169
- Gadalla, A. M. and Tsai, W., 1989, 'Electrical Discharge Machining of Tungsten Carbide-Cobalt Composites,' J. American Ceramic Society, Vol. 72, No.8, pp. 1396-1401 https://doi.org/10.1111/j.1151-2916.1989.tb07660.x
- Huang, J. T., Liao, Y. S. and Hsue, W. J., 1991, 'Determination of Finish-Cutting Operation Number and Machining-Parameters Setting in WEDM,' J. of Mat. Proc. Tech., Vol. 87, pp. 69-81 https://doi.org/10.1016/S0924-0136(98)00334-3
- Kobayashi, K., 1995, 'The Present and Future Developments of EDM and ECM,' Proc. of the 10th Inter. Symp. Electromachining (ISEM - XI) , pp. 29-48
- Konig, W., Dauw, D. F., Levy, G. and Panten, U. 1988, 'EDM, A Future Step Towards the Machining Ceramics,' Annals of the CIRP, Vol. 37, No.2, pp. 625-631
- Lenz, E., Katz, E., Konig, W. and Wertheim, R., 1975, 'Cracking Behaviour of Sintered Carbides during E. D. M.,' Annals of the CIRP, Vol. 24, pp. 109-114
- Levy, G. N. and Wertheim, R., 1988, 'EDM Machining of Sintered Carbide Compacting Dies,' Annals of the CIRP, Vol. 37, No. 1, pp. 59-62
- Luo, Y. F., 1997, 'The Dependence ofInterface Discharge Transitivity Upon the Gap Debris in Precision Electrodischarge Machining,' J. of Material Processing Tech., Vol. 68, pp. 121-131 https://doi.org/10.1016/S0924-0136(96)00019-2
- Magma, T., Kobayashi, K., Yatomi, T. and Hon, K. K. E., 1989, 'Micro-Finishing by High Frequency AC Source in Wire EDM,' ISEM-9, pp. 76-79
- Maggi, F., 1991, 'Wire Cut Electro-Erosion of I-lard Metals,' Agie Erosion Technology, April
- McCleary, Gail P. 1984, 'Cutting Tungsten Carbide with Wire EDM -from the Carbide Manufac-turer's Point of View,' The carbide and Tool Journal, Nov. -Dec. , pp. 3-8
- Storr, M., 1992, 'New dielectric medium IONOPLUS IME-MM,' Proc. of the 10th Inter. Symp. For Electromachining (ISEM - X), pp. 161-169
- Williams, R. E. and Rajurkar, K. P., 1991, 'Study of Wire Electrical Discharge Machined Surface Characteristics,' J. of Mat. Proc. Tech. Vol. 28, pp. 127-138 https://doi.org/10.1016/0924-0136(91)90212-W