DOI QR코드

DOI QR Code

플라즈마를 적용한 알루미늄의 표면처리가 알루미늄/CFRP 복합재의 접합강도에 미치는 영향

Effect of Aluminum Treatment by Plasma on the Bonding Strength Between Aluminum and CFRP Composites

  • 발행 : 2001.12.01

초록

This paper documents the effect of surface treatment of aluminum on the bonding strength of aluminum/CFRP composites. The surface of aluminum panel was treated by DC plasma. The optimal treatment condition of the aluminum was determined by measuring the contact angle and T-peel strength as functions of mixture ratio of acetylene gas to nitrogen gas. The mixture ratios used were 1:9, 3:7, 5:5, 7:3, and 9:1 Lap shear tests and T-peel tests were performed using surface-treated alumiunm/CFRP composites and regular alumiunm/CFRP composites. The results showed that the contact angle was minimized and the T-peel strength was maximized iota the mixture ratio of 5:5. The results also showed that the shear strength of surface-treated alumiunm/CFRP composites was 34% greater than that of regular alumiunm/CFRP composites. The T-peel strength of surface-treated alumiunm/CFRP composites was also 5 times greater than that of regular alumiunm/CFRP composites.

키워드

참고문헌

  1. Baker, A.A., 1987, 'Fiber Composite Repair of Cracked Metallic Aircraft Components,' Composite, Vol. 18, pp. 293-308 https://doi.org/10.1016/0010-4361(87)90293-X
  2. Ong, C.L., and Shen, S.B., 1990, 'Some Results on Metal and Composite Patch Reinforcement of Aluminum Honeycomb Panel,' Theoretical and Applide Fracture Mechanics, Vol. 14, pp. 145-153 https://doi.org/10.1016/0167-8442(91)90031-E
  3. Ong, C.L., and Shen, S.B., 1990, 'Repair of F-104 Aircraft Nosedome by Composite Patching,' Theoretical and Applied Fracture Mechanics, Vol. 15, pp. 75-83 https://doi.org/10.1016/0167-8442(91)90006-6
  4. Chester, R.J., Walker, K.F. and Chalkley, P.D., 1999, 'Adhesively Bonded Repairs to Primary Aircraft Structure,' International J.of Adhesion and Adhesives, Vol. 19, pp. 1-8 https://doi.org/10.1016/S0143-7496(98)00014-1
  5. Denny J.J. and Mall. S., 1997, 'Characterization of Disbond Effects on Fatigue Crack Growth Behavior in Aluminum Plate with Bonded Composite Patch,' Engineering Fracture Mechanics, Vol. 57, pp. 507-525 https://doi.org/10.1016/S0013-7944(97)00050-7
  6. Schubbe, J. J. and Mall. S., 1999, 'Investigation of a Cracked Thick Aluminum Panel Repaired with a Bonded Composite Patch,' Engineering Fracture Mechanics, Vol. 63, pp. 305-323 https://doi.org/10.1016/S0013-7944(99)00032-6
  7. Baker, A.A., 1999, 'Bonded Composite Repair of Fatigue-Cracked Primary Aircraft Strucure,' Composite Structures, Vol. 47, pp. 431-443 https://doi.org/10.1016/S0263-8223(00)00011-8
  8. 이경엽, 강용태, 양준호, 2001, '에너지 구조재적용을 위한 알루미늄/섬유강화 복합재의 표면처리,' 한국표면공학회지, 제34권 제1호 pp. 56-61
  9. Koh, S. K. Kim, K. H. Kang, B. H. Ha, S. C., 1999, 'New Surface Layer Formation by Ion Assisted Reaction (IAR) and Optimum Plasma Zone (OPZ),' Mitigation of Heat Exchanger Fouling and Its Economic and Environmental Problems, Banff, Canada. July pp. 11-16
  10. ASTM D1876-95, 'Standard test method for peel resistance of adhesive (T-Peel Test),' ASTM Standards, Vol. 15.06, pp. 107-109
  11. ASTM D906-94a, 'Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading,' ASTM Standards, Vol. 15.06, pp. 25-28