Transactions of the Korean Society of Machine Tool Engineers (한국공작기계학회논문집)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

A Study on the Cutting Characteristics and Analysis by a FEM in the Machining of Ti-6Al-4V alloy

Ti-6Al-4V 합금의 절삭특성과 FEM 해석 비교에 관한 연구

  • Published : 2001.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

The cutting characteristics of Ti-6Al-4V alloy and total wear when machining Ti-6Al-4V alloy was studied to understand the machining characteristics. This material is one of the strong candidate materials present and future aerospace or met ical applications. Nowadays their usage has already been broaden to commercial applications such as golf club head, finger rings and many decorative items. Anticipating the general use of this material and development of the titanium alloy in domestic facilities, the review and the study of the machining parameters far those alloys are deemed necessary. This study is concentrated to the machining parameters of the Ti-6Al-4V alloy due to their dominant position in the production of tita mum alloys.

Keywords

References

  1. チタンの加工技術 v.1章 (社)チタニウム協會
  2. Massachusetts Institute of Technology Rep. Mechining Titanium M.C. Show;S.O. Dirke;P.A. Smith;N.H. Cook;E.G. Loewen;C.T. Yang
  3. Third Wave AdvantEdge Theorical Manual Version 3.6
  4. J. of JSPE v.44 no.9 A Study of Sawtoothed Chip Formation(1st);Analysis of the Pitch of Shear Zones and the Distance of Slips Noboru Ueda;Tetsuo Matsuo
  5. J. of Manufacturing Science and Engineering v.119 Flow Instability in the Orthogonal Machining of CP Titanium J. Sheikh-Ahmad;J.A. Bailey
  6. Metallurgical Transactions v.3 Adiabatic Instability in the Orthogonal Cutting of Steel J.C. Lemaire;W.A. Backofen
  7. J. of JSPE v.52 no.9 Study on Machining Process of Difficult-to-Machine Materials(2nd);Analysis of Stress and Temperature Distributions by Visio-Plasticity Technique and Finite Difference Method Eiji Usui;Toshiyuki Obidawa;Takahiro Shirakashi
  8. 한국공작기계학회 추계학술대회 논문집 초경공구를 사용한 Ti-6A1-4V 합금의 절삭가공시 공구마멸과 절삭특성에 관한 연구 김남용;홍우표;이동주
  9. J. of JSPE v.118 Computational Machining of Titanium alloy-Finite Element Modeling and a Few Result T. Obikawa
  10. 한국정밀공학회지 v.16 no.6 3차원 절삭시 칩-공구 마찰 및 전단 측정 해석 이영문;최원식;송태영;박태준;장은실