Abstract
It is known that recoating or protection with glass-tube can prevent FBG sensor from being affected by birefringence. However, the effect on the strain transfer of such treatment has not been verified yet. Three types (uncoated, recoated and glass-tube protection) of FBG sensors are fabricated to verify the effect on the strain transfer of each treatment. The strain from each sensor embedded into a graphite/epoxy composite specimen was compared with that of ESG attached on the surface through the tensile test. And the signal characteristics of each sensor were also compared using the tensile test of a tapered aluminum specimen which was under the state of strain gradient.
광섬유 센서의 복굴절 현상을 방지하기 위해 리코팅이나 유리 튜브를 이용하여 보호하는 방법이 있다. 하지만, 이와 같은 처리를 하였을 경우 센서의 변형률 전달성에 대한 검증이 아직 이루어지지 알았다. 본 연구에서는 세가지 형태(재킷이 벗겨진, 리코팅을 한, 유리 튜브로 보호한)의 광섬유 브래그 격자 센서를 제작하여 그라파이트/에폭시 복합재료 적층시편의 인장 실험을 통해 변형률 전달성을 검증하였다. 광섬유 센서는 삽입 적용하였고 표면에 부탁한 변형률 게이지와 값을 비교하였다. 그리고 변형률 구배가 존재하는 경사진 알루미늄 시편의 인장 실험을 통해 각 센서의 신호 특성을 비교하였다.