References
- Klement Jr., W., Wilens, R.H. and Duwez, 1960, Nature, Vol. 187, p. 809
- 성진경, 김문철, 1995, '단롤법을 이용한 연자성재료의 주조기술,' 주조, 제15권 제4호, pp. 317-330
- Steen, P.R., Karcher, C, 1997, 'Fluid Mechanics of Spin Casting of Metals ; Review,' Annual Review of Fluid Mechanics, Vol. 29 https://doi.org/10.1146/annurev.fluid.29.1.373
- Fiedler, H., Muhlbach, R., Stephani, G., 1984, 'The Effect of the Main Processing Parameters on the Geometry of Amorphous Metal Ribbons during Planar Flow Casting,' Journal of Material Science, Vol. 19, pp. 3229-3235 https://doi.org/10.1007/BF00549809
- Kavesh, S., 1978, Metallic Glasses ASM, Metals Park, Ohio, p. 36
- Takeshita, K., Shingu, P.H., 1986, 'An Analysis of the Melt Puddle Formation in the Single Roller Chill Block Casting,' Transaction of the Japan Institute of Metals, vol. 27, No.2, pp. 141-148
- Wu, S.L., Chen, C.W., Hwang, W.S., Yang, C.c., 1992, 'Analysis for Melt Puddle in the Planar Flow Casting Process,' Applied Mathematical Modeling, Vol. 16, pp. 394-403 https://doi.org/10.1016/0307-904X(92)90074-D
- Hirt, C.W., Krrzekwa, D.R, Jacobson, L.A., 1992, 'Modeling Planar Flow Casting with FLOW-3D,' Melt- Spinning and strip Casting: Research and Implementation, Edited by Eric F. Matthys, pp. 107-122
- Kukulka, D.J., Poopisut, A., Mollendorf, J.C., 1996, 'Development of Planar Flow Casting Transport Relations,' Proceedings of the 2nd European Thermal-Sciences and 14th UlT National Heat Transfer Conference, Vol. 1
- Rapidly Quenched Metals Ⅲ Hilmann, H.;Hilzinger, H.R.
- Hillmann, H., Hilzinger, H.R., 1978, Rapidly Quenched Metals III, The Metals Society, p. 22
- Walter, J.L., 1978, Rapidly Quenched Metals III, The Metals Society; p. 30
- Hirt, C.W. and Nichols, B.D., 1981, 'Volume of Fluid (VOF) Method for the Dynamics of Free Boundaries,' Journal of Computational Physics, Vol. 39, pp. 201-225
- Martine, D.T., Lawrence D.C., Raymond C.M., Hirt, C.W., 1985, 'NASA-VOF2D : A Computer Program for Incompressible Flows. with Free Surfaces,' LA-10612-MS
- Wilde, P.D., Matthys, E.F., 1992, 'Experimental Investigation of the Planar Flow Casting Process : Development and Free Surface Characteristics of the Solidification Puddle,' Material Science and Engineering, A150, pp. 237-247
- Kawahara, H., Shiraishi T., Ichihara, J., 1995, 'A Mathematical Model of Molten Alloy Flow in Planar Flow Casting,' Modelling of Casting, Welding and Advanced Solidification Processes VII, TMS, pp. 833-840
- Yu, H., 1987, ' A Fluid Mechanics Model of the Planar Flow Melt Spinning Process Under Low Reynolds Number Conditions,' Metallurgical Transactions B, Vol. 18B, pp. 557-563
- Huang, S.C., Fiedler, H.C., 1981, 'Amorphous Ribbon Formation and the Effects of Casting Velocity,' Materials Science and Engineering, vol. 51, pp. 39-43 https://doi.org/10.1016/0025-5416(81)90104-X
- Sudheer, M., 1984, 'Comparison of the Single Roller and Double Roller Process for Casting Low Carbon Steel,' Rapidly Quenched Metals, Elsevier, New York, vol. V, pp. 95-100